ONKYO TX-NR1000 User Manual download pdf (Page 95)

Input Setup

—Continued

Subwoofer Sensitivity

The following are also settings for “Multichannel 1” or

“Multichannel 2” (cannot be speciﬁed separately for

each input source).

Some DVD decks output the LFE channel at –15 dB

lower than the other channels in the multichannel

output.

The level setting under the Level Calibration sub-menu

is applied to the analog and digital inputs as well as the

multichannel input. Therefore, in this setting, you can

set the optimum LFE channel level applied only to the

multichannel input.

You can select from 0 (Default), +5, +10 and +15 dB.

Digital Audio

The following are settings for digital audio output.

Opt 1-Opt 6:

Select the device connected to “DIGITAL

IN OPTICAL 1-6.”

Coax 1-Coax 6:

Select the device connected to

“DIGITAL IN COAXIAL 1-6.”

No:

Select this when no device is connected.

Digital Format

For digital connections, you can set the digital signals to

be detected preferentially. When “Digital Audio” is set

to “No” on the Audio Assign Sub-menu above, this item

is not displayed.

Auto

: Automatically detects the format of input signals.

The signal format (Dolby Digital, DTS, PCM, AAC,

etc.) used for the selected source is automatically

detected, and necessary decoding is performed.

DTS:

Select for DTS decoding. You should select this if

you feel it takes too long to detect the signals when you

have selected “Auto,” or if you dislike noises caused by

CDs fast forwarding or rewinding.

If any sound other than DTS is input, there is no sound.

PCM:

Select for PCM decoding. You should select this

if you dislike omission of the top of a subsequent tune

when you have selected “Auto.”

If any sound other than PCM is input, there is no sound.

Note:

When playing any DTS-type CD or LD, always select

“Auto” and “DTS.” Selecting “PCM” will cause noises.

i.LINK

When you connect multiple devices using the i.LINK

(AUDIO) interface, the device names in the i.LINK

connection appear and you can choose the input device

from them using the cursor ([ ]/[ ]) buttons. The

device selected here will be the preferred device among

the connected i.LINK (AUDIO) devices.

No:

Select this when connected i.LINK (AUDIO)

devices are not selected as input devices.

Select Server

When input Music Server is selected from NET

AUDIO, you can specify a server to be connected (See

page 78).

The following are settings for video.

Composite Video

1-6:

Select the device connected to the “VIDEO IN 1-

6” jack.

Last:

Select this when you want video signal from the

device you last selected to be output.

No:

Select this when no device is connected.

S-Video

1-6:

Select the device connected to the “S VIDEO IN 1-

6” jack.

Last:

Select this when you want video signal from the

device you last selected to be output.

No:

Select this when no device is connected.

Component Video

RCA 1-4:

Select the device connected to the

“COMPONENT VIDEO IN 1-4” jack.

BNC (European and Asian models only):

Select the

device connected to the “COMPONENT VIDEO IN”

BNC type jack.

Last:

Select this when you want video signal from the

device you last selected to be output.

No:

Select this when no device is connected.

HDMI

Select the device connected to the “HDMI IN 1”

jack. When selecting this, the video signal from the

HDMI IN 1 terminal will also be output to the HDMI

OUT terminal.

Select the device connected to the “HDMI IN 2”

jack. When selecting this, the video signal from the

HDMI IN 2 terminal will also be output to the HDMI

OUT terminal.

VIDEO:

Select this when you want the video signal

such as Composite Video, S Video, and Component

Video to be output from the HDMI OUT terminal.

Last:

Select this when you want video signal from the

device you last selected to be output.

No:

Select this when no device is connected.

Music Server Sub-menu (When input

is NET AUDIO)

Video Assign Sub-menu

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 151 152

Comments to this Manuals

No comments

ONKYO TX-NR1000 User Manual Page 95

Comments to this Manuals

Related products and manuals for AV receivers ONKYO TX-NR1000