ONKYO TX-NR1000 User Manual download pdf (Page 30)

Connecting AV Components

In addition to the conventional terminals, the TX-NR1000/TX-NR5000E has various terminals that are capable of next-

generation digital transmission.

Before connecting AV components to the TX-NR1000/TX-NR5000E, make sure that your cable type matches the ter-

minal shape and the signal type and that the cable length is appropriate for the placement of your connected components.

Audio cables

*The audio input signal from the ETHERNET (Net-Tune) or MULTI-CH IN terminal will not be output to the HDMI

OUT terminal. Also, the DVD audio or SACD audio input signal from the i.LINK (AUDIO) terminal will not be output

to the HDMI OUT terminal.

When you play a source in the remote zone (Zone 2 or Zone 3), the following restrictions are applied.

• When you play the audio signal from Super Audio CD or DVD-Audio format sources through the i.LINK (AUDIO)

interface, the audio input signal from these sources will not be output to Zone 2 or Zone 3. With this connection, you

cannot record from these sources.

• When you play the audio signal from the i.LINK (AUDIO) interface in Zone 3, only the PCM signal will be output

as an analog source to the AUDIO OUT terminals. Similarly, with this connection, you can record only the PCM sig-

nal as an analog source through the AUDIO OUT terminals.

• The audio input signal from the LAN port will be output only to the AUDIO OUT terminals as an analog source.

• When you play the audio signal from the PH or AUDIO IN terminals in Zone 3, the input source will be output only

to the AUDIO OUT terminals as an analog source. Similarly, in this connection, you can record only the audio signal

as an analog source through the AUDIO OUT terminals.

Types of Connection Cables and Terminals

Cable names Cable forms Terminals shapes Description

Optical cable

The connection using these cable types trans-

mits digital audio signals. There is no sound

quality difference among these cable types.

Note:

Some optical cables have their own covers.

Before making a connection, remove the cov-

ers. When plugging in a cable, be sure to match

the connector shape with the terminal shape.

Each optical terminal on the TX-NR1000/

TX-NR5000E has its own shutter-type cover.

For the TX-NR1000/TX-NR5000E, plug in the

optical cables so that the optical cable connec-

tor pushes the terminal cover down.

Coaxial cable

Audio connection

cable

This connection transmits an analog audio sig-

nal. Plug the red connector (R) into the right

channel terminal and the white connector (L)

into the left channel connector.

Multichannel con-

nection cable

The terminals for this cable type are for DVD

players that are compatible with the DVD-Audio

format. This connection transmits multichannel

analog audio signals.

i.LINK (AUDIO) con-

nection cable

(4-pin (S400) type)

This connection can be used for connecting

i.LINK (AUDIO)-enabled devices and to transmit

digital audio signals. Also, multichannel analog

audio signals from DVD-Audio or Super Audio

CD format sources will be transmitted digitally.

The TX-NR1000/TX-NR5000E handles only

audio signals through i.LINK connection.

Ethernet cable

(CAT-5 Straight

type)

The Ethernet cable is used for connecting multi-

ple PCs or network-ready audio components

that constitute a local area network (LAN). A

LAN is a smaller network composed within a

house or building. The connecting terminals for

the Ethernet cables are often called “LAN port”

or “broadband port.”

SBR SBL

SR SL

SUB C

MULTI

ETHERNET

(

Net

Tune

)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 151 152

Comments to this Manuals

No comments

ONKYO TX-NR1000 User Manual Page 30

Comments to this Manuals

Related products and manuals for AV receivers ONKYO TX-NR1000