ONKYO TX-NR1000 User Manual Page 100

  • Download
  • Add to my manuals
  • Print
  • Page
    / 152
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 99
100
Listening Mode Setup
—Continued
Re-EQ On:
Adjusts the soundtrack in which the treble
is overemphasized, so that the sound is optimized for
home theater.
Academy On:
Lowers the treble level and lters the
noise when the source contains emphasized treble
sound and too much hiss, such as an old mono audio
movie recorded onto videotape.
b. Multiplex Input Channel
This option allows you to select the preferred audio
channel when the input is the AAC/Dolby Digital sound
multiplex signal. This option can also be set for Zone 2.
The input channel setting made here will be applied to
all the listening modes for the Dolby Digital and AAC
input signal 1+1 sources.
Main (Default):
The main channel is preferred for
output.
Sub:
The sub-channel is preferred for output.
Main+Sub:
The main and sub-channel are output.
c. Output Speaker
This option congures the speakers to use when playing
the source in the D.F. Multiplex listening mode. Select
the speaker terminals to which the speakers you want to
use are connected.
Center A:
Outputs the source only from the speaker
connected to the CENTER SPEAKERS A terminal.
Center B:
Outputs the source only from the speaker
connected to the CENTER SPEAKERS B terminal.
Center A+B:
Outputs the source from the speakers
connected to the CENTER SPEAKERS A and
CENTER SPEAKERS B terminals.
Front L/R A (Default):
Outputs the source from the
speakers connected to the FRONT L/R SPEAKERS A
terminals.
Front L/R B:
Outputs the source from the speakers
connected to the FRONT L/R SPEAKERS B terminals.
Front L/R A+B:
Outputs the source from the speakers
connected to the FRONT L/R SPEAKERS A and
FRONT L/R SPEAKERS B terminals. Note that this
option is not available when the front speakers are in Bi-
amp or in BTL conguration.
When the (Speaker B) Front L/R is set to an option
other than Main A in the Speaker Conguration
sub-menu, the available options will be Center A,
Center B, Center A+B, and Front L/R A.
When the (Speaker A) Center is set to Not Used in
the Speaker Conguration sub-menu, the available
options will be Front L/R A, Front L/R B, and
Front L/R A+B. In this case, the default setting is
Front L/R A.
When the (Speaker B) Center is set to an option
other than Main A in the Speaker Conguration
sub-menu, the available options will be Center A,
Front L/R A, Front L/R B, and Front L/R A+B.
When the impedance setting for either Front L/R A
or Front L/R B in the Speaker Impedance sub-menu
is set to 6 ohms or 4 ohms, Front L/R A+B
cannot be selected. Similarly, when the impedance
setting for either Center A or Center B in the
Speaker Impedance sub-menu is set to 6 ohms or 4
ohms, Center A+B cannot be selected.
When the (Speaker A) Center is set to Not Used
and the (Speaker B) Front L/R is set to an option
other than Main A in the Speaker Conguration
sub-menu, this setting will not be displayed.
d. Subwoofer
This option congures the subwoofer to use when
playing the source in the D.F. Multiplex listening mode.
Select the terminal to which the subwoofer you want to
use is connected. This setting can be made when the
(Speaker A) Subwoofer is set to an option other than
Not Used in the Speaker Conguration sub-menu.
However, when the (Speaker B) Subwoofer is set to
an option other than Main A in the Speaker
Conguration sub-menu, the available options will be
A or Not Used.
A (Default):
Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
B:
Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B:
Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used:
No subwoofers are used for playback
This sub-menu allows you to congure the audio effect
and playback options when you play a source in the
Stereo listening mode.
a. Re-EQ/Academy
This option allows you to congure whether the Re-EQ
or Academy effect is applied or not in the Stereo
listening mode. Use these effects when you do not want
to overemphasize the treble sound. This option can also
be set for Zone 2.
Off (Default):
The effects are not applied.
Re-EQ On:
Adjusts the soundtrack in which the treble
is overemphasized, so that the sound is optimized for
home theater.
Academy On:
Lowers the treble level and lters the
noise when the source contains emphasized treble
sound and too much hiss, such as an old mono audio
movie recorded onto videotape.
b. Front Speaker
This option congures the speakers to use when playing
the source in the Stereo listening mode. Select the
speaker terminals to which the speakers you want to use
are connected. This setting can be made when the
(Speaker B) Front L/R is set to Main A in the
Speaker Conguration sub-menu.
Stereo Setup Sub-menu
Page view 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 151 152

Comments to this Manuals

No comments