Onkyo TX SR507 User Manual download pdf (Page 82)

100

Zone 2—Continued

This section explains how to turn Zone 2 on and off, how

to select an input source for Zone 2, and how to adjust

the volume for Zone 2.

Controlling Zone 2 from the AV receiver

Notes:

• To select AM or FM, press the [TUNER] input

selector button repeatedly.

• Only analog input sources are output by Zone 2.

Digital input sources are not output. If no sound is

heard when an input source is selected, check to make

sure it’s connected to an analog input.

• While Zone 2 is on, the Auto Power On/Standby and

Direct Change u functions do not work.

• While Powered Zone 2 is being used, listening modes

that require surround back speakers (6.1/7.1), such as

Dolby Digital EX and DTS-ES are unavailable.

• When the “Powered Zone 2” setting is set to “Act” and

the input selector of Zone 2 is selected, power con-

sumption on standby mode slightly increases.

Controlling Zone 2 with the Remote

Controller

Note:

To control Zone 2, you must press the remote

controller’s [ZONE 2] button first.

Using Zone 2

To turn on Zone 2 and select an

input source, press the [ZONE 2]

button followed by an input

selector button within 8 seconds.

Zone 2 turns on and ZONE 2 indicator

lights up.

To select the same source as that of the

main room, press the [ZONE 2] button

repeatedly until “Z2 Sel: Source”

appears.

To select AM or FM press the

[TUNER] input selector button

repeatedly.

Note:

You cannot select different AM or FM

radio stations for your main room,

Zone 2. The same AM/FM radio station

will be heard in each room.

To turn off Zone 2, press the

ZONE 2 [OFF] button.

ZONE 2

OFF

INPUT SELECTOR

ZONE 2 indicator

Press the [ZONE 2] button, then

point the remote controller at the

AV receiver and press the

[ON/STANDBY] button.

Zone 2 turns on and ZONE 2 indicator

lights up.

To select an input source for

Zone 2, press the [ZONE 2]

button, followed by an INPUT

SELECTOR button.

To select AM or FM press the

[TUNER] INPUT SELECTOR button

repeatedly.

Note:

You cannot select different AM or FM

radio stations for your main room,

Zone 2. The same AM/FM radio station

will be heard in each room.

To turn off Zone 2, press the

[ZONE 2] button, followed by the

[ON/STANDBY] button.

ZONE2

ON/STANDBY

INPUT

SELECTOR

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 99 100

Comments to this Manuals

No comments

Onkyo TX SR507 User Manual Page 82

Comments to this Manuals

Related products and manuals for Acoustics Onkyo TX SR507