Onkyo TX SR507 User Manual download pdf (Page 67)

100

Advanced Setup—Continued

Surround

Small: Select if the surround speakers are small (default).

Large: Select if the surround speakers are large.

None: Select if no surround speakers are connected.

SurrBack

*3*4

Small: Select if the surround back speakers are small.

Large: Select if the surround back speakers are large.

None: Select if no surround back speakers are connected (default).

SurrBack ch

2ch: Select if two (left and right) surround back speakers are connected.

1ch: Select if only one surround back L speaker is connected.

*1 If the “Subwoofer” setting is set to “No”, this setting is fixed at “Large” and does not appear.

*2 If the “Front” setting is set to “Small”, the “Large” option cannot be selected.

*3 If the “Surround” setting is set to “None”, or Powered Zone 2 is being used, this setting does not appear.

*4 If the “Surround” setting is set to “Small”, the Large option cannot be selected.

*5 If the “Surround” or “SurrBack” settings are set to “None”, this setting does not appear.

Crossover (Crossover Frequency)

This setting is set automatically by the Audyssey 2EQ™ Room Correction and Speaker Setup function

(see page 37).

This setting only applies to the speakers that you specified as “Small” in the “2-2. Sp Config (Speaker

Configuration) (TX-SR507)” on page 66.

To get the best bass performance from your speaker system, you need to set the crossover frequency according

to the size and frequency response of your speakers.

Use the diameter of the smallest speaker in your system when choosing the crossover frequency.

Speaker cone diameter Crossover frequency

Over 8 in. (20 cm)

40/50/60Hz*

6-1/2 to 8 in. (16–20 cm) 80Hz

5-1/4 to 6-1/2 in. (13–16 cm) 100Hz (default)

3-1/2 to 5-1/4 in. (9–13 cm) 120Hz

Under 3-1/2 in. (9 cm) 150 /200Hz*

* Choose the setting suitable for the speaker.

Notes:

• For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and

set accordingly.

• Choose a higher crossover frequency if you want more sound from your subwoofer.

DoubleBass

This setting is not set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function

(see page 37).

With the Double Bass function, you can boost bass output by feeding bass sounds from the front left, right, and

center to the subwoofer. This function can be set only if the “Subwoofer” setting is set to “Yes”, and the “Front”

setting is set to “Large” in the “2-2. Sp Config (Speaker Configuration) (TX-SR507)” on page 66.

On: Double Bass function on. Bass from the front left and right channels is also fed to the

subwoofer (default).

Off: Double Bass function off.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 99 100

Comments to this Manuals

No comments

Onkyo TX SR507 User Manual Page 67

Comments to this Manuals

Related products and manuals for Acoustics Onkyo TX SR507