Onkyo TX SR507 User Manual download pdf (Page 77)

100

Advanced Setup—Continued

■ LipSync

The AV receiver can be set to automatically correct any

delay between the video and the audio, based on the data

from the connected monitor.

Notes:

• This function works only if your HDMI-compatible

TV supports HDMI Lip Sync.

• You can check the amount of delay being applied by

the HDMI Lip Sync function on the A/V Sync screen

(see page 73).

■ xvColor

If your HDMI source and HDMI-compatible TV both

support the “x.v.Color,” you can enable “xvColor” on the

AV receiver with this setting.

Notes:

• If the color is unnatural when “xvColor” is set to

“Enable”, change the setting to

“Disable”.

• Refer to the connected component’s instruction

manual for details.

■ HDMI Ctrl (RIHD)

This function allows -compatible components

connected via HDMI to be controlled with the AV

receiver.

Notes:

• , which stands for Remote Interactive over

HDMI, is the name of the system control function

found on Onkyo components. The AV receiver can be

used with CEC (Consumer Electronics Control),

which allows system control over HDMI and is part of

the HDMI standard. CEC provides interoperability

between various components, however, operation with

components other than -compatible

components cannot be guaranteed.

When set to “On” and close the menu, the name of

connected -compatible components and

“RIHD ON” are displayed on the AV receiver.

“Search…”

→ “(name)” → “RIHD ON”

When the AV receiver cannot receive the name of the

component, it is displayed as “Player*” or

“Recorder*”, etc (“*” means the number of two or

more component).

When set to “Off” and close the menu, “RIHD OFF”

are displayed on the AV receiver.

“Disconnect”

→ “RIHD OFF”

•Set to “Off” when a connected piece of equipment is

not compatible or it is unclear whether the equipment

is compatible or not.

• If movement is unnatural when set to

“On”, change the

setting to

“Off”.

• Refer to the connected component’s instruction

manual for details.

Power Ctrl

To link the power functions of -compatible

components connected via HDMI, select “On”.

Notes:

• The

“Power Ctrl” setting can be set only when the

above

“HDMI Ctrl (RIHD)” setting is set to “On”.

• HDMI power control only works with -

compatible components that support it and may not

work properly with some components due to their

settings or compatibility.

• When set to “On”, power consumption will increase.

• When set to “On”, regardless of whether the AV

receiver is On or on Standby, both audio and video

received by an HDMI input will be output by the

HDMI OUT for playback on the TV or other

component that’s connected to the HDMI OUT.

• Refer to the connected component’s instruction

manual for details.

TV Ctrl

Set to “On” when you want to control the AV receiver

from an -compatible TV that is connected to

HDMI.

Notes:

•Set to

“Off” when the TV is not compatible or when it

is unclear whether the TV is compatible or not.

• The “TV Ctrl” setting can be set only when the above

“HDMI Ctrl (RIHD)” and “Power Ctrl” settings are

both set to “On”.

• Refer to the connected component’s instruction

manual for details.

Disable: HDMI lip sync disabled (default).

Enable: HDMI lip sync enabled.

Disable: “x.v.Color” disabled (default).

Enable: “x.v.Color” enabled.

Off: disabled (default).

On: enabled.

Off: Power Control disabled.

On: Power Control enabled.

Off: TV Control disabled.

On: TV Control enabled.

Note:

After changing the settings of the

“HDMI Ctrl

(RIHD)”

, “Power Ctrl”, or “TV Ctrl”, turn off the

power to all connected pieces of equipment and

then turn them on again. Refer to the User’s

Manuals for all connected pieces of equipment.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 99 100

Comments to this Manuals

No comments

Onkyo TX SR507 User Manual Page 77

Comments to this Manuals

Related products and manuals for Acoustics Onkyo TX SR507