Onkyo TX SR507 User Manual download pdf (Page 75)

Advanced Setup—Continued

This section explains the items on the “

Miscellaneous”

menu.

Note:

This procedure can also be performed on the AV receiver

by using its [SETUP] button, arrow buttons, and

[ENTER] button.

Volume Setup

■ MaxVolume

With this setting, you can limit the maximum volume.

The Maximum Volume range is “Off”, 79 to 30.

■ POnVol

With this preference, you can specify the volume setting

to be used each time the AV receiver is turned on.

The range is “Last”, “Min”, 1 to 79 or “Max”.

To use the same volume level that was used when the AV

receiver was turned off, select “Last”.

The “POnVol” cannot be set higher than the “Max

Volume” setting.

■ HP Level

With this preference, you can specify the headphone

volume relative to the main volume. This is useful if

there’s a volume difference between your speakers and

your headphones. The headphones level can be set from

–12 dB to +12 dB.

Miscellaneous (Volume) Setup

Press the [RECEIVER] button followed by

the [SETUP] button.

Use the Up and Down [q]/[w] buttons to

select “6. Miscellaneous”, and then press

[ENTER].

Use the Up and Down [q]/[w] buttons to

select an item, and then press [ENTER].

Use the Up and Down [q]/[w] buttons to

select an item, and use the Left and Right

[e]/[r] buttons to change it.

The items are explained below.

When you’ve finished, press the [SETUP]

button.

Setup closes.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 99 100

No comments

Onkyo TX SR507 User Manual Page 75