Onkyo TX SR507 User Manual download pdf (Page 76)

100

Advanced Setup—Continued

This section explains items on the “Hardware Setup”

menu.

Note:

This procedure can also be performed on the AV receiver

by using its [SETUP] button, arrow buttons, and

[ENTER] button.

Remote Control

■ Remote ID

When several Onkyo components are used in the same

room, their remote ID codes may overlap. To

differentiate the AV receiver from the other components,

you can change its remote ID from 1, the default, to 2 or

Note:

If you do change the AV receiver’s remote ID, be sure to

change the remote controller to the same ID (see below),

otherwise, you won’t be able to control it with the remote

controller.

Changing the Remote Controller’s ID

Tuner

■ FM/AM (North American/Taiwan models)

See “AM/FM Frequency Step Setup (not European

models)” on page 49.

■ AM Freq (Asian model)

See “AM/FM Frequency Step Setup (not European

models)” on page 49.

HDMI

■ AudioTVOut

This preference determines whether audio received at

the HDMI IN is output by the HDMI OUT. You may

want to turn this preference on if your TV is connected

to the HDMI OUT and you want to listen to the audio

from a component that’s connected to an HDMI IN,

through your TV’s speakers. Normally, this should be set

to “Off”.

Notes:

• If

“On” is selected and the signal can be output by the

TV, the AV receiver will output no sound through its

speakers.

• If “On” is selected, “TV Sp On” appears on the Dis-

play by pressing the [DISPLAY] button.

•When

“TV Ctrl” is set to “On”, this setting is set to

“Auto”.

• With some TVs and input signals, no sound may be

output even when this setting is set to

“On”.

• When the “AudioTVOut” setting is set to

“On”, or

“TV Ctrl” is set to “On” and you’re listening through

your TV’s speakers (see page 25), if you turn up the

AV receiver’s volume control, the sound will be output

by the AV receiver’s front left and right speakers. To

stop the AV receiver’s speakers producing sound,

change the settings, change your TV’s settings, or turn

down the AV receiver’s volume.

Hardware Setup

Press the [RECEIVER] button followed by

the [SETUP] button.

Use the Up and Down [q]/[w] buttons to

select “7. HardwareSetup”, and then

press [ENTER].

Use the Up and Down [q]/[w] buttons to

select an item, and then press [ENTER].

Use the Up and Down [q]/[w] buttons to

select an item, and use the Left and Right

[e]/[r] buttons to change it.

The items are explained below.

When you’ve finished, press the

[SETUP] button.

Setup menu closes.

While holding down the [RECEIVER]

button, press and hold down the [SETUP]

button until the Remote Indicator lights up

(about 3 seconds).

Use the number buttons to enter ID 1, 2, or

The Remote Indicator flashes twice.

Off: HDMI audio is not output (default).

On: HDMI audio is output.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 99 100

Comments to this Manuals

No comments

Onkyo TX SR507 User Manual Page 76

Comments to this Manuals

Related products and manuals for Acoustics Onkyo TX SR507