ONKYO TX-NR5009 Instruction Manual Page 67
- Page / 108
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
67
En
■ Audio Return Channel
` Off
` Auto
:
The audio signal from your TV tuner can be sent to
the HDMI OUT MAIN of the AV receiver.
The audio return channel (ARC) function allows an ARC
capable TV to send the audio stream to the HDMI OUT
MAIN of the AV receiver. To use this function, you must
select the TV/CD input selector and your TV must be
ARC capable.
Note
• If you set “Audio Return Channel” to “Auto”, the “Audio
Selector” settings of the TV/CD input selector will be
automatically switched to “ARC” (➔ page 63).
•The “Audio Return Channel” setting can be set only when the
“HDMI Control(RIHD)” setting is set to “On”.
• This setting is set to “Auto” automatically when the “HDMI
Control(RIHD)” is set to “On” for the first time.
■ Lip Sync
` Off
`
On
This function allows the AV receiver to automatically
correct any delay between the video and the audio, based
on the data from the connected monitor.
Note
• This function works only if your HDMI-compatible TV supports
HDMI Lip Sync.
•If the “Monitor Out” setting is set to “HDMI Main”,
“Both(Main)” or “Both” (➔ page 48), the delay will be
corrected in accordance with the monitor connected to HDMI
OUT MAIN. On the other hand, if “HDMI Sub” or
“Both(Sub)” is selected, the delay will be corrected in
accordance with the monitor connected to HDMI OUT SUB.
Auto Standby
■ Auto Standby
` Off
` On
When “Auto Standby” is set to “On”, the AV receiver
will automatically enter standby mode if there is no
operation for 30 minutes with no audio and no video
signal input.
“Auto Standby” will appear on the display and OSD 30
seconds before the Auto Standby comes on.
Default setting: On (European and Asian models), Off
(North American models)
Note
•Set to “
On”, the Auto Standby function may activate itself
during playback with some sources.
•The Auto
Standby function does not work when Zone 2/3 is on.
Network
This section explains how to configure the AV receiver’s
network settings manually.
If your router’s DHCP server is enabled, you don’t need to
change any of these settings, as the AV receiver is set to
use DHCP to configure itself automatically by default
(i.e., DHCP is set to “Enable”). If, however, your router’s
DHCP server is disabled (you’re for example using static
IP), you’ll need to configure these settings yourself, in
which case, a knowledge of Ethernet networking is
essential.
What’s DHCP?
DHCP (Dynamic Host Configuration Protocol) is used by
routers, computers, the AV receiver, and other devices to
automatically configure themselves on a network.
What’s DNS?
The DNS (Domain Name System) translates domain
names into IP addresses. For example, when you enter a
domain name such as www.onkyousa.com in your Web
browser, before accessing the site, your browser uses DNS
to translate this into an IP address, in this case
63.148.251.142.
■ MAC Address
This is the AV receiver’s MAC (Media Access Control)
address. This address cannot be changed.
■ DHCP
`
Enable
` Disable
This setting determines whether or not the AV receiver
uses DHCP to automatically configure its IP Address,
Subnet Mask, Gateway, and DNS Server settings.
Note
• If you select “Disable”, you must configure the “IP Address”,
“Subnet Mask”, “Gateway”, and “DNS Server” settings
yourself.
■ IP Address
` Class A:
“10.0.0.0” to “10.255.255.255”
` Class B:
“172.16.0.0” to “172.31.255.255”
` Class C:
“192.168.0.0” to “192.168.255.255”
Enter a static IP address provided by your ISP.
Most routers use Class C IP addresses.
■ Subnet Mask
Enter the subnet mask address provided by your ISP
(typically 255.255.255.0).
■ Gateway
Enter the gateway address provided by your ISP.
■ DNS Server
Enter the DNS server address provided by your ISP.
After changing the settings of the
“HDMI
Control(RIHD)
”, “HDMI Through” or “Audio
Return Channel”
turn off the power on all connected
pieces of equipment and then turn them on again. Refer
to the user’s manuals for all connected pieces of
equipment.
After modifying the network settings, you must confirm
the changes by executing “Save”.
- TX-NR5009 1
- TX-NR3009 1
- Important Safety Instructions 2
- For U.S. models 3
- For Canadian Models 3
- Modèle pour les Canadien 3
- Supplied Accessories 4
- Contents 5
- Features 6
- Front Panel 8
- Rear Panel 10
- Remote Controller 11
- Connecting the AV Receiver 12
- Speaker Configuration 13
- Using Dipole Speakers 15
- Using Powered Subwoofers 16
- Bi-amping the Front Speakers 16
- Connecting a Power Amplifier 17
- About AV Connections 18
- EDJF G I 20
- Connecting Onkyo u Components 22
- Connecting the Antennas 23
- Connecting the Power Cord 23
- Turning On 24
- Turning Off 24
- Playback 25
- Playing a USB Device 27
- Listening to Internet Radio 27
- Registering My Favorites 28
- Remote Playback 29
- Listening to AM/FM Radio 30
- Presetting AM/FM Stations 31
- Using Basic Functions 33
- AUDYSSEY 34
- Using the Listening Modes 36
- About Listening Modes 37
- ■ Listening Modes 38
- THX C i n ema 41
- Neo 6:THX Mu s i c 41
- THX Game s 41
- THX U2 C i nema 42
- THXU2Music 42
- THX U2 Game s 42
- THX Su r r EX 42
- Using the Home Menu 43
- Using the Sleep Timer 43
- Displaying Source Information 44
- Changing the Input Display 44
- Using the Whole House Mode 44
- Selecting Speaker Layout 45
- Muting the AV Receiver 45
- Using Headphones 45
- Using Easy Macros 46
- Recording 46
- Advanced Setup 47
- Input/Output Assign 48
- HDMI Input 49
- Component Video Input 50
- Digital Audio Input 50
- Analog Audio Input 50
- Speaker Setup 51
- Speaker Distance 53
- Level Calibration 54
- Equalizer Settings 54
- THX Audio Setup 54
- Audio Adjust 55
- Source Setup 58
- Shift All Erase 60
- 4 - 4. Name Edit 60
- Picture Adjust 61
- Audio Selector 63
- Charge Mode 63
- Listening Mode Preset 64
- Miscellaneous 64
- Hardware Setup 65
- ”, “HDMI Through” or “Audio 67
- Return Channel” 67
- Remote Controller Setup 68
- Lock Setup 69
- Using the Audio Settings 69
- Dolby Volume 70
- Audyssey 70
- Late Night 70
- Music Optimizer 70
- Screen Centered Dialog 71
- Multi Zone 72
- Zone 2 Video Output 73
- 12V Trigger Out 73
- Muting Zones 74
- Components 75
- Using the Onkyo Dock 76
- Controlling Your iPod/iPhone 77
- ✔: Available buttons 78
- Controlling Other Components 79
- Entering Remote Control Codes 80
- Components Connected via u 81
- Resetting REMOTE MODE Buttons 81
- Learning Commands 83
- Using Normal Macros 84
- RECEIVER 85
- UP-A1 Dock for iPod/iPhone 88
- Zone 2/3 89
- USB Device Playback 89
- SETUP button 90
- “Direct” (➔ page 61) 90
- Firmware Update 91
- Troubleshooting 92
- Before you start 92
- Update procedure 92
- Updating the Firmware via USB 92
- MONITOR OUT 94
- Video Resolution Chart 96
- About p-compatible components 97
- About HDMI 99
- Network/USB Features 100
- Server Requirements 101
- USB Device Requirements 101
- Supported Audio File Formats 102
- About DLNA 102
- Specifications (TX-NR5009) 103
- ■ Audio Inputs 104
- ■ Audio Outputs 104
- ■ Others 104
- Specifications (TX-NR3009) 105
Related products and manuals for AV receivers ONKYO TX-NR5009
AV receivers ONKYO TX-NR5008 Instruction Manual
(116 pages)
(116 pages)
AV receivers ONKYO PR-SC5507 Instruction Manual
(156 pages)
(156 pages)
AV receivers ONKYO HT-S6505 Instruction Manual
(132 pages)
(132 pages)
AV receivers ONKYO TX-NR5010 Instruction Manual
(168 pages)
(168 pages)
AV receivers ONKYO A-9155 Instruction Manual
(20 pages)
(20 pages)
AV receivers ONKYO TX-NR717 Instruction Manual
(148 pages)
(148 pages)
AV receivers ONKYO TX-NR807 Instruction Manual
(148 pages)
(148 pages)
AV receivers ONKYO TX-SR707 Instruction Manual
(128 pages)
(128 pages)
AV receivers ONKYO TX-NR616 Instruction Manual
(144 pages)
(144 pages)
© 2020, manymanuals.com. All rights reserved. | 1.441 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals