ONKYO TX-NR5009 Instruction Manual download pdf (Page 58)

Sound Program Edit

■ Sound Program

` Stereo Source 1, Stereo Source 2, Stereo Source 3,

Multich Source 1, Multich Source 2, Multich

Source 3

When playing back different content types on the same

source, or when listening to a single content type on

different sources, you can pre-register the settings that

best suit each content in “Sound Program”. The

registered settings can then be called up and modified in

one set. Use “Sound Program Edit” to register and

modify a combination of settings.

Tip

• To select the registered settings, see “Sound Program”

(➔ page 69).

■ Listening Mode

You can assign a default listening mode that will be

selected automatically when you select the sound

program.

The “Last Valid” option means that the listening mode

selected last will be used.

The “Straight Decode” option means that straight

decoding listening mode (Dolby Digital, DTS, etc.) is

selected.

■ Subwoofer

` No, Yes

You can choose whether or not to use the subwoofer with

the sound program.

■ Music Optimizer

` Off, On

See “Music Optimizer” (➔ page 70).

■ Equalizer

` Off

` Manual:

The manual setting in “Equalizer Settings”

(➔ page 54) is applied.

■ Audyssey

` Off, Movie, Music

See “Audyssey”.

■ Dynamic EQ

*1*2

` Off, On

See “Dynamic EQ” (➔ page 59).

■ Dynamic Volume

*1*2

` Off, Light, Medium, Heavy

See “Dynamic Volume” (➔ page 59).

■ Dolby Volume

` Off, On

See “Dolby Volume” (➔ page 56).

Note

•“Listening Mode” is only available when the input signal

matches the setting of “Sound Program”.

• You cannot select the “Subwoofer” setting if you set to “No” in

the “Speaker Configuration”.

•“Music Optimizer” is only available when “Stereo Source 1”,

“Stereo Source 2” or “Stereo Source 3” is selected.

•When “Audyssey Quick Start” has been used for measurement,

the “Audyssey”setting cannot be selected.

This setting cannot be used when the “Listening Mode”

setting is set to “Pure Audio” or “Direct”.

To enable this setting, you must first perform the Room

Correction and Speaker Setup.

Items can be set individually for each input selector.

Main menu Source Setup

Audyssey

■ Audyssey

Off

` Movie:

Select this setting for movie material.

The Audyssey indicator lights.

` Music:

Select this setting for music material.

The Audyssey indicator lights.

Note

•If the “Audyssey” setting is set to “Off”, the “Equalizer”

settings are applied (➔ page 54).

•When “Audyssey Quick Start” has been used for measurement,

the “Audyssey”setting cannot be selected.

• Audyssey equalizing does not work with DSD sources.

Source Setup

Preparation

Press the input selector buttons to select an input source.

The tone for each speaker is set automatically by

Audyssey MultEQ

XT32 Room Correction and

Speaker Setup. To enable the following settings, you

must first perform the Room Correction and Speaker

Setup (➔ page 33).

These technologies cannot be used when:

• a pair of headphones is connected, or

• Speakers B is being used, or

• either Pure Audio or Direct listening mode is selected.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 107 108

Comments to this Manuals

No comments

ONKYO TX-NR5009 Instruction Manual Page 58

Comments to this Manuals

Related products and manuals for AV receivers ONKYO TX-NR5009