Onkyo TX SR607 User Manual download pdf (Page 81)

Advanced Setup—Continued

This section explains items on the “Hardware Setup”

menu.

Note:

This procedure can also be performed on the AV receiver

by using its [SETUP] button, arrow buttons, and

[ENTER] button.

Remote Control

■ Remote ID

When several Onkyo components are used in the same

room, their remote ID codes may overlap. To differenti-

ate the AV receiver from the other components, you can

change its remote ID from 1, the default, to 2 or 3.

Note:

If you do change the AV receiver’s remote ID, be sure to

change the remote controller to the same ID (see below),

otherwise, you won’t be able to control it with the remote

controller.

Changing the Remote Controller’s ID

Tuner

■ FM/AM Frequency Step (on some models)

See “FM/AM Frequency Step Setup (on some models)”

on page 44.

■ SAT Radio Mode (on North American model)

If you connect a SIRIUS Satellite Radio antenna to the

AV receiver (sold separately), set this setting to “SIR-

IUS”. See the separate Satellite Radio Guide for more

information.

■ Antenna Aiming (on North American model)

The ID of the Sirius Connect Home Tuner is displayed

here. You must sign up to obtain a SIRIUS ID. See the

separate Satellite Radio Guide for more information.

■ SIRIUS Parental Lock

(on North American model)

This item is for use with SIRIUS Satellite Radio. It’s not

available if “SAT Radio Mode” is set to “None”. See the

separate Satellite Radio Guide for more information.

HDMI

■ Audio TV Out

This preference determines whether audio received at

the HDMI IN is output by the HDMI OUT. You may

want to turn this preference on if your TV is connected

to the HDMI OUT and you want to listen to the audio

from a component that’s connected to an HDMI IN,

through your TV’s speakers. Normally, this should be set

to “Off”.

Notes:

•If

“On” is selected and the signal can be output by the

TV, the AV receiver will output no sound through its

speakers.

• If “On” is selected, “TV Sp On” appears on the Dis-

play by pressing the [DISPLAY] button.

• When

“TV Control” is set to “On”, this setting is set to

“Auto”.

• With some TVs and input signals, no sound may be

output even when this setting is set to

“On”.

• When the “Audio TV Out” setting is set to

“On”, or

“TV Control” is set to “On” and you’re listening

through your TV’s speakers (see page 24), if you turn

up the AV receiver’s volume control, the sound will be

output by the AV receiver’s front left and right speak-

ers. To stop the AV receiver’s speakers producing

sound, change the settings, change your TV’s settings,

or turn down the AV receiver’s volume.

Hardware Setup

Press the [RECEIVER] button followed by

the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the

appropriate external input is selected on your TV.

Use the Up and Down [q]/[w] buttons to

select “7. Hardware Setup”, and then

press [ENTER].

The “Hardware Setup” menu appears.

Use the Up and Down [q]/[w] buttons to

select an item, and then press [ENTER].

The screen for that item appears.

Use the Up and Down [q]/[w] buttons to

select an item, and use the Left and Right

[e]/[r] buttons to change it.

The items are explained below.

When you’ve finished, press the

[SETUP] button.

The setup menu closes.

While holding down the [RECEIVER] but-

ton, press and hold down the [SETUP]

button until the Remote indicator lights up

(about 3 seconds).

7. Hardware Setup

1. Remote ID

2. Tuner

3. HDMI

Use the number buttons to enter ID 1, 2, or

The Remote indicator flashes twice.

Off: HDMI audio is not output (default).

On: HDMI audio is output.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 107 108

Comments to this Manuals

No comments

Onkyo TX SR607 User Manual Page 81

Comments to this Manuals

Related products and manuals for Acoustics Onkyo TX SR607