Onkyo TX SR607 User Manual download pdf (Page 85)

Zone 2

In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you

can select a different source for each room.

There are two ways you can connect Zone 2 speakers:

1. Connect them directly to the AV receiver.

2. Connect them to an amp in Zone 2.

Connecting Your Zone 2 Speakers Directly

to the AV receiver

This setup allows 5.1-channel playback in your main

room and 2-channel stereo playback in Zone 2, with a

different source in each room. This is called Powered

Zone 2, as the Zone 2 speakers are powered by the AV

receiver. Note that when Powered Zone 2 is turned off,

you can enjoy 7.1-channel playback in your main room.

Hookup

• Connect your Zone 2 speakers to the AV receiver’s

ZONE 2 L/R speaker terminals.

(North American/Taiwan models)

(Other models)

Notes:

• With this setup, the Zone 2 volume is controlled by the

AV r e ce iv e r .

• Powered Zone 2 cannot be used if “Speaker Type” is

set to “Bi-Amp” (see page 43).

Connecting Zone 2

To use this setup, you must set the “Powered Zone 2”

setting to “Act” (see page 86).

L R

Main room

Zone 2

AV receiver

L R

Main room

Zone 2

AV receiver

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 107 108

No comments

Onkyo TX SR607 User Manual Page 85