ONKYO TX-SR604/604E User Manual download pdf (Page 28)

Connecting the AV Receiver

—Continued

If you have two video recorders (e.g., a VCR and a DVD recorder), connect one recorder to the VIDEO 1 OUT jacks, as

shown here, and connect the other recorder to the VIDEO 2 OUT jacks in the same way.

Notes:

• The AV receiver must be turned on for recording. Recording is not possible while it’s in Standby mode.

• If you want to record directly from your TV or playback VCR to the recording VCR without going through the AV

receiver, connect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs. See

the manuals supplied with your TV and VCR for details.

• Video signals connected to composite video inputs can only be recorded via composite video outputs. If your

TV/VCR is connected to a composite video input, the recording VCR must be connected to a composite video output.

Similarly, video signals connected to S-Video inputs can only be recorded via S-Video outputs. If your TV/VCR is

connected to an S-Video input, the recording VCR must be connected to an S-Video output.

Connecting a VCR or DVD Recorder for Recording

Connection AV receiver Signal ﬂow VCR or DVD recorder Picture quality

VIDEO 1 OUT S

⇒

S-Video input

Better

VIDEO 1 OUT V

⇒

Composite video input Standard

VIDEO 1 OUT L/R

⇒

Audio L/R input

DIGITAL OPTICAL OUT

⇒

Digital optical input

Step 1: Video Connection

Choose a video connection that matches your VCR or DVD recorder ( or ), and then make the connection. The

video source to be recorded must be connected to the AV receiver via the same type of connection.

A B

Step 2: Audio Connection

Choose an audio connection that matches your VCR or DVD recorder ( or ), and then make the connection.

a b

S VIDEO

AUDIO

VIDEO

OPTICAL

VCR,

DVD recorder

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 91 92

[email protected] 12 Nov 2024 | 03:54:02

This is your amplifier Onkyo TX SR604

ONKYO TX-SR604/604E User Manual Page 28