ONKYO TX-NR3030 Instruction Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
16
Step 3:
Playing Back
6
Using the multi-zone function
The function allows you to connect the unit with a TV or audio
equipment placed in a separate room so that you can enjoy audio
and video of the connected equipment even if you are staying in a
different room. It is possible to perform playback in the main room
and a separate room at the same time, for example by playing
the Blu-ray Disc player in the main room where the unit is placed
while playing Internet radio in a separate room. It is also possible to
perform playback only in a separate room. There are four methods
to configure multi-zone connection as described in "a" to "d" in the
right. Simultaneous playback in all zones is also possible.
Zone 2
Zone 3
Main room
z
The sources from which you can enjoy the sound in a
separate room: For Zone 2, any can be selected from among
an external device connected to the HDMI input jack or the
analog audio input jacks (
¼
) of the unit, the "NET", "USB" or
"BLUETOOTH" source, and the AM/FM broadcasting. For Zone 3,
any can be selected from among an external device connected to
the analog audio input jacks (
¼
) of the unit, the "NET", "USB" or
"BLUETOOTH" source, and the AM/FM broadcasting.
¼
When you connect a CD player or such other player without HDMI
output jack, connect it to the analog audio input jacks of the unit.
Multi-zone output is not possible if the connection is only with digital
optical cable or digital coaxial cable. In case of analog connection,
analog audio output setting may be necessary on the player.
r As for HDMI input and analog audio input, it is possible to play
the same source or different sources in the main room and
separate room.
r As for the "NET", "USB" and "BLUETOOTH", you cannot select
different audio sources for the main room and separate room.
For example, if "NET" has been selected in the main room and
then "USB" is selected as playback source in the separate room,
the input in the main room will change to "USB" accordingly.
r When listening to AM/FM broadcasting, you cannot select
different stations for the main room and separate room.
Therefore broadcasting of the same station will be heard in the
both rooms.
r If you play the same HDMI connected player for the main room
and a separate room, the sound field processing for 2 ch PCM
signals will be made in the main room.
Outputting Video/Audio to a Separate Room
a. Connecting a TV in a separate room using
HDMI cable
You can play video and audio of the HDMI connected
player on the TV in a separate room. With an HDMI cable,
connect between the HDMI OUT ZONE 2 jack of the unit
and the HDMI IN jack of the TV in a separate room.
Zone 2
Change the setting: Press RECEIVER and then HOME
on the remote controller, select "Setup" - "1.Input/Output
Assign" - "Monitor Out" - "Zone 2 Monitor Out" and set the
setting to "Use".
r You can view the information of the connected device on
the TV of Zone 2 by pressing DISPLAY during Zone 2
playback.
b. Connecting a TV in a separate room using
composite video cable
Video from the player without HDMI out jack can be
displayed on the TV in a separate room. First, connect
the player to composite video input jack of the unit. Then,
connect the TV in the separate room to ZONE 2 OUT V
jack of the unit using a composite video cable.
Zone 2
r It is not possible to output video from the player to the
TV in the separate room if the player is connected to the
HDMI IN jack or COMPONENT VIDEO IN jack.
r
In this connection method, audio from the player cannot
be output from the TV. To output audio in the separate
room, see the next section "Listening to Music in a
Separate Room" and connect the unit to the integrated
amplifier or speakers located in the room where the TV is
placed.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments