Onkyo HT-R390 User Manual download pdf (Page 29)

Note

•When an HDMI IN is assigned to an input selector in

“HDMI Input” (➔ page 28), this input assignment is

automatically set to the same HDMI IN. And in addition to the

usual inputs (e.g., COAXIAL, etc.), you can also select HDMI

inputs.

• Available sampling rate for PCM signals from a digital input

(optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

• If you connect a component (such as UP-A1 Dock that seated

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot

assign any input to PORT selector.

Menu Sp Config

This section explains how to specify

which speakers are connected and their

sizes.

For speakers with a cone diameter larger

than 6-1/2 inches (16 cm), specify Large

(full band). For those with a smaller

diameter, specify Small (the default setting varies from

country to country).

The crossover frequency can be changed in the

“Crossover (Crossover Frequency)” (➔ page 29).

Note

• These settings are disabled when:

– a pair of headphones is connected, or

–the “Audio TV Out” setting is set to “On” (➔ page 35), or

–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 34) and

you’re listening through your TV speakers, or

– Speakers B is on, or

– Speakers A is off.

■ Subwoofer

` Yes

Select if a subwoofer is connected.

` No:

Select if no subwoofer is connected.

■ Front

` Small:

` Large:

Select based on the cone diameter.

Note

•If the “Subwoofer” setting is set to “No”, this setting is fixed at

“Large” and does not appear.

■ Center

, Surround

` Small:

` Large:

Select based on the cone diameter.

` None:

Select if no speaker is connected.

Note

If the “Front” setting is set to “Small”, the “Large” option

cannot be selected.

■ Crossover (Crossover Frequency)

This setting is advantageous for the speakers that you

specified as “Small” in the “Sp Config (Speaker

Configuration)” (➔ page 29). To get the best bass

performance from your speaker system, you need to set

the crossover frequency according to the size and

frequency response of your speakers.

` 40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,

120Hz, 150Hz, 200Hz

(The default setting varies from country to country.)

Use the diameter of the smallest speaker in your system

when choosing the crossover frequency.

Choose the setting suitable for the speaker.

Note

• For a more accurate setting, look up the frequency response in

the manuals supplied with your speakers and set accordingly.

• Choose a higher crossover frequency if you want more sound

from your subwoofer.

■ Double Bass

` On

` Off

Turn this setting on to boost bass output by feeding bass

sounds from the front left, right, and center channels to the

subwoofer.

Note

• This function can be set only if the “Subwoofer” setting is set to

“Yes”, and the “Front” setting is set to “Large” (➔ page 29).

■ Wireless Front, Wireless Surr (Surround)

` Yes:

The audio is output from the speakers connected to

the wireless unit.

` No

The audio is not output from the speakers connected

to the wireless unit.

When the wireless unit is connected to the UNIVERSAL

PORT jack on the AV receiver, you can select if you wish

to output the audio from the speakers connected to the

wireless unit.

Note

• When no wireless unit is connected to the UNIVERSAL PORT

jack on the AV receiver, this setting is not available.

If the “Surround” setting is set to “None” (➔ page 29), this

setting cannot be selected.

Sp Config (Speaker Configuration)

Cone diameter

Speaker cone diameter Crossover frequency

Over 8 in. (20 cm)

40/50/60 Hz

6-1/2 to 8 in. (16 to 20 cm)

70/80/90 Hz

5-1/4 to 6-1/2 in. (13 to 16 cm) 100 Hz

3-1/2 to 5-1/4 in. (9 to 13 cm) 120 Hz

Under 3-1/2 in. (9 cm)

150/200 Hz

When an optional unit is connected to the

UNIVERSAL PORT jack on the AV receiver, the

speaker setting menu may appear on-screen.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Comments to this Manuals

No comments

Onkyo HT-R390 User Manual Page 29

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Onkyo HT-R390