ONKYO TX-SR444 Specifications download pdf (Page 38)

Advanced Settings (Setup Menu)

En-18

Crossover

Change speaker settings such as the crossover frequency of the speakers. Settings are

automatically configured if you use the Automatic Speaker Setup. Audio will not be output

while you are making this setting.

Setting Item Default Value Setting Details

Front Small Set the size for each of the speakers. Use the

diameter of the cone as a guide.

"Small": When the cone diameter is less than 6-1/2

inches (16 cm)

"Large": When the cone diameter is greater than

6-1/2 inches (16 cm)

● The setting is fixed to "Large" if "Configuration" -

"Subwoofer" is set to "No".

Center Small Set the size for each of the speakers. Use the

diameter of the cone as a guide.

"Small": When the cone diameter is less than 6-1/2

inches (16 cm)

"Large": When the cone diameter is greater than

6-1/2 inches (16 cm)

● "Large" can be selected only when "Front" is set

to "Large".

● If an item cannot be selected even though

connection is correct, check that the settings in

"Configuration" - "Speaker Channels" matches

the number of connected channels.

Height Small Set the size for each of the speakers. Use the

diameter of the cone as a guide.

"Small": When the cone diameter is less than 6-1/2

inches (16 cm)

"Large": When the cone diameter is greater than

6-1/2 inches (16 cm)

● "Large" can be selected only when "Front" is set

to "Large".

● If an item cannot be selected even though

connection is correct, check that the settings in

"Configuration" - "Speaker Channels" matches

the number of connected channels.

Setting Item Default Value Setting Details

Surround Small Set the size for each of the speakers. Use the

diameter of the cone as a guide.

"Small": When the cone diameter is less than 6-1/2

inches (16 cm)

"Large": When the cone diameter is greater than

6-1/2 inches (16 cm)

● "Large" can be selected only when "Front" is set

to "Large".

● If an item cannot be selected even though

connection is correct, check that the settings in

"Configuration" - "Speaker Channels" matches

the number of connected channels.

Back Small Set the size for each of the speakers. Use the

diameter of the cone as a guide.

"Small": When the cone diameter is less than 6-1/2

inches (16 cm)

"Large": When the cone diameter is greater than

6-1/2 inches (16 cm)

● "Large" can be selected only when "Surround" is

set to "Large".

● If an item cannot be selected even though

connection is correct, check that the settings in

"Configuration" - "Speaker Channels" matches

the number of connected channels.

Crossover 100Hz Set the lowest frequency that each the speakers can

output so that frequencies lower than this are output

from the subwoofer. Set using the diameter of the

speaker with the smallest cone as a guide.

"40Hz", "50Hz", "60Hz": For cone diameters greater

than 8 inches (20 cm)

"70Hz", "80Hz", "90Hz": For cone diameters

between 6-1/2 inches to 8 inches (16 to 20 cm)

"100Hz": For cone diameters 5-1/4 to 6-1/2 inches

(13 to 16 cm)

"120Hz": For cone diameters 3-1/2 to 5-1/4 inches

(9 to 13 cm)

"150Hz", "180Hz", "200Hz": For cone diameters less

than 3-1/2 inches (9 cm)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 87 88

Comments to this Manuals

No comments

ONKYO TX-SR444 Specifications Page 38

Comments to this Manuals

Related products and manuals for AV receivers ONKYO TX-SR444