ONKYO TX-SR444 Specifications download pdf (Page 57)

Troubleshooting

En-37

RI Dock

● Make sure the unit is turned on, the correct input source

is selected, and the volume is turned up.

● Make sure the plugs are pushed in all the way.

● Make sure your iPod/iPhone is properly inserted in

the Dock. If your iPod/iPhone is in a case, it may not

connect properly to the Dock. Always remove your iPod/

iPhone from the case before inserting it into the Dock.

Try reconnecting your iPod/iPhone.

● Make sure your iPod/iPhone is actually playing.

Check the following if the above does not fix the problem:

¼ There is no sound

● Try resetting your iPod/iPhone.

¼ There is no video

● Make sure the correct input is selected on your TV or

the unit.

● Make sure that your iPod/iPhone model's TV OUT

setting is set to On.

● Some versions of the iPod/iPhone do not output video.

¼ The AV receiver's remote controller does not control

your iPod/iPhone

● The iPod/iPhone cannot be operated while it is

displaying the Apple logo.

● Make sure you have selected the correct remote

controller mode.

● When you use the AV receiver's remote controller, point

it toward this unit.

● Before operating with the remote controller, you may

need to play on your iPod/iPhone to make the input

selector be recognized.

● Depending on your iPod/iPhone model and generation,

some buttons may not work as expected.

● Try resetting your iPod/iPhone.

¼ The unit unexpectedly selects your iPod/iPhone as

the input source

● Always pause iPod/iPhone playback before selecting

a different input source. If playback is not paused, the

Direct Change function may select your iPod/iPhone

as the input source by mistake during the transition

between tracks.

Others

¼ Strange noises can be heard from the unit

● If you have connected another unit to the same wall

outlet as this unit, this noise may be an effect from the

other unit. If the symptoms improve by unplugging the

power cord of the other unit, use different wall outlets for

this unit and the other unit.

¼ When performing Automatic Speaker Setup, the

measurement fails and the message "Ambient noise is

too high�" is displayed

● This can be caused by a malfunction in your speaker

unit. Check if the unit produces normal sounds.

¼ The Late Night function does not work

● Make sure the source material is Dolby Digital, Dolby

Digital Plus or Dolby TrueHD.

¼ The Cinema Filter function does not work

● This function can be used in the following listening

modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD,

Multichannel, DSD, DTS, DTS-ES, DTS Neo:6 Cinema,

DTS 96/24, DTS-HD High Resolution Audio, DTS-HD

Master Audio, DTS Express.

¼ How do I change the language of a multiplex source

● Select "Main" or "Sub" for "Multiplex Input Channel" in

"3. Audio Adjust" -"Multiplex/Mono".

¼ Power consumption in standby mode

● In the following cases, the power consumption in

standby mode may reach up to a maximum of 33 W:

– When "HDMI CEC (RIHD)" is set to "On". (Depending

on the TV status, the AV receiver will enter normal

standby mode.)

– The "HDMI Standby Through" setting is set to other

than "Off".

– The "Power Out at Standby for STRM BOX" setting

is "On".

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 87 88

Comments to this Manuals

No comments

ONKYO TX-SR444 Specifications Page 57

Comments to this Manuals

Related products and manuals for AV receivers ONKYO TX-SR444