ONKYO PR-SC5508 User Manual download pdf (Page 76)

Zone 3 speakers must be connected to an amp in Zone 3.

Connecting Your Zone 3 Speakers

You can enjoy 2-channel stereo playback in Zone 3 and a

different source to those selected for your main room and

Zone 2.

Note

• With the default settings, the Zone 3 volume must be set on the

Zone 3 amp. If your Zone 3 amp has no volume control, set the

“Zone 3 Out” setting to “Variable” so that you can set the

Zone 3 volume on the AV controller (➔ 76).

Note

• This procedure can also be performed on the AV controller by

using SETUP, arrows, and ENTER.

■ Zone 2 Out, Zone 3 Out

` Fixed

The Zone 2/3 volume must be set on the amp in that

zone.

` Va riabl e:

The Zone 2/3 volume can be set on the AV control-

ler.

If you’ve connected your Zone 2/3 speakers to an amp

with no volume control, set the “Zone 2 Out” and

“Zone 3 Out” setting, respectively, to “Va riable” so that

you can set the volume, balance, and tone of Zone 2/3 on

the AV controller.

■ Zone 2 Maximum Volume,

Zone 3 Maximum Volume

` Off

, 50 to 99 (Absolute display)

` Off

, –32dB to +17dB (Relative display)

With this setting, you can limit the maximum volume for

Zone 2/3.

Connecting Zone 3

Hookup

• Use an RCA audio cable to connect the AV controller’s PRE

OUT ZONE 3 L/R jacks to an analog audio input on your

Zone 3 amp.

• Use an RCA audio cable to connect the AV controller’s PRE

OUT ZONE 3 SUBWOOFER jack to the line input on a

powered subwoofer in Zone 3.

• Connect your Zone 3 speakers to the speaker terminals on

your Zone 3 amp.

LINE INPUT

Main room

Zone 3

AV controller

Powered subwoofer

Receiver/

integrated amp

Multichannel power amp

Setting the Multi Zone

Press RECEIVER followed by SETUP.

The main menu appears onscreen.

Tip

• If the main menu doesn’t appear, make sure the appropri-

ate external input is selected on your TV.

Use q/w to select “Hardware Setup”, and then

press ENTER.

The “Hardware Setup” menu appears.

Use q/w to select “Multi Zone”, and then press

ENTER.

The “Multi Zone” menu appears.

Use q/w to select an item, and use e/r to change

it.

The items are explained below.

Press SETUP.

The setup menu closes.

7. Hardware Setup

1. Remote ID

2. Multi Zone

3. Tuner

4. HDMI

5. Auto Power Down

6. Network

7. Firmware Update

7-2. Multi Zone

Zone 2 Out

Zone 2 Maximum Volume

Zone 2 Power On Volume

Zone 2 Component Out

Zone 3 Out

Zone 3 Maximum Volume

Zone 3 Power On Volume

Fixed

Off

Last

Use

Fixed

Off

Last

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 107 108

Comments to this Manuals

No comments

ONKYO PR-SC5508 User Manual Page 76

Comments to this Manuals

Related products and manuals for AV receivers ONKYO PR-SC5508