ONKYO PR-SC5508 User Manual download pdf (Page 64)

Re-EQ

With the Re-EQ function, you can compensate a

soundtrack whose high-frequency content is too harsh,

making it more suitable for home theater viewing.

■ Re-EQ

` Off

Re-EQ Function off.

` On:

Re-EQ Function on.

This function can be used with the following listening

modes: Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, Multichannel, DTS, DTS-HD High Reso-

lution Audio, DTS-HD Master Audio, DTS Express,

DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby

PLIIx Movie, Neo:6 Cinema and 5.1-channel source +

Neo:6, and Neural Surround.

■ Re-EQ(THX)

` Off:

Re-EQ (THX) Function off.

` On

Re-EQ (THX) Function on.

This function can be used with the following listening

modes: THX Cinema, THX Surround EX, and

THX Ultra2 Cinema.

Note

• Settings for the Re-EQ function are kept in each listening mode.

However, in THX listening mode, when the AV controller is

turned off, it will return to “On”.

• This setting cannot be used while a pair of headphones is con-

nected.

Audio Selector

You can set priorities of audio output when there are both

digital and analog inputs.

■ Audio Selector

` ARC:

The audio signal from your TV tuner can be sent to

the HDMI OUT MAIN of the AV controller.

With this selection the TV’s audio can be automati-

cally selected as a priority among other assignments.

` HDMI:

This can be selected when HDMI IN has been

assigned as an input source. If both HDMI (HDMI

IN) and digital audio inputs (COAXIAL IN or OPTI-

CAL IN) have been assigned, HDMI input is auto-

matically selected as a priority.

` COAX:

This can be selected when COAXIAL IN has been

assigned as an input source. If both coaxial and

HDMI inputs have been assigned, coaxial input is

automatically selected as a priority.

` OPT:

This can be selected when OPTICAL IN has been

assigned as an input source. If both optical and

HDMI inputs have been assigned, optical input is

automatically selected as a priority.

` Multich:

The AV controller always outputs analog signals

from multichannel analog input.

` Balance:

The AV controller always outputs analog signals

from balanced input.

` Analog:

The AV controller always outputs analog signals.

Note

• The setting is stored individually for each input selector.

• This setting can be made only for the input source that is

assigned as HDMI IN, COAXIAL IN, or OPTICAL IN.

• To select the digital audio input, see “Digital Audio Input” for

more detail (➔ 47).

• To select “Multich”, you must assign the multichannel input

(➔ 47).

• To select “Balance”, you must assign the balanced input (➔ 47).

You can select “ARC” if you select the TV/CD input selector.

But you cannot select it if you’ve selected “Off” in the “Audio

Return Channel” setting (➔ 61).

Setting the Incoming Digital Signal (Fixed

Mode)

By pressing ENTER while selecting “HDMI”, “COAX”,

“OPT” in the “Audio Selector”, you can specify the input

signal in the Fixed Mode. Pressing ENTER again allows

you to return to the “Audio Selector” setting.

Normally, the AV controller detects the signal format

automatically. However, if you experience either of the

following issues when playing PCM or DTS material, you

can manually set the signal format to PCM or DTS.

• If the beginnings of tracks from a PCM source are cut

off, try setting the format to PCM.

• If noise is produced when fast forwarding or reversing a

DTS CD, try setting the format to DTS.

■ Fixed Mode

` Auto:

The format is detected automatically. If no digital

input signal is present, the corresponding analog

input is used instead.

` PCM:

Only 2-channel PCM format input signals will be

heard. If the input signal is not PCM, the PCM indi-

cator will flash and noise may also be produced.

` DTS:

Only DTS (but not DTS-HD) format input signals

will be heard. If the input signal is not DTS, the DTS

indicator will flash and there will be no sound.

Note

• The setting is stored individually for each input selector.

• The setting will be reset to “Auto” when you change the setting

in the “Audio Selector” (➔ 64).

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 107 108

Comments to this Manuals

No comments

ONKYO PR-SC5508 User Manual Page 64

Comments to this Manuals

Related products and manuals for AV receivers ONKYO PR-SC5508