Onkyo TX-DS797 User Manual download pdf (Page 52)

Enjoying music or videos with the TX-DS797

Using the sleep time (remote controller only)

The SLEEP button enables you to set the TX-DS797 to turn off

automatically after a specified time period. If you press it once, the

TX-DS797 will turn off after 90 minutes. Each time it is pressed

thereafter, the remaining time until the TX-DS797 turns off

decreases by 10 minutes. While, the sleep function is enabled, you

can press the SLEEP button to see how much time is left. To cancel

the sleep function, press the SLEEP button when the time displayed

is less than 10 minutes.

If you are using the remote zone (Zone 2), it will turn off at the same

time as the main zone. If you want to set the sleep function for Zone

2 only, set the sleep function with main zone turned on and then put

the main zone into the standby state.

Temporarily changing the speaker output levels

To change the individual speaker volumes temporarily, follow the

procedure given below. Each channel can be set between –12 to +12

decibels. Note that the calibration settings will return to the original

settings when the TX-DS797 is put in standby.

1. Press the RCVR MODE button.

2. Press the CH SEL button and select

the desired speaker.

3. Press the LEVEL or button to

adjust the volume level.

Remote controller

Notes:

• You cannot select a speaker if the Speaker Config sub-menu of

the Speaker Setup is set to No or None.

• If the speaker level is set to +1 dB or higher, the maximum level

indicated on the display will change if you raise the volume

level.

• When you press the TEST button after you set the level, the

current level will be used as the value set via the test tone.

STANDBY/ON

OFF

POWER

STANDBY

PHONES

MASTER VOLUME

FM AM PHONO C

DTAPE

VIDEO

4 VIDEO 5VIDEO 3VIDEO 2VIDEO 1

DVD

OFFZONE 2REC OUTDISPLAY DIMMER

UPSAMPLING

AUDIO

SELECTOR

ZONE 2

()

GRN

REC

()

RED

S VIDEO AUDIO

VIDEO L R

DIGITAL

CLEAR

VCR 2VCR 1

VIDEO 5/VIDEO CAM INPUT

DSP

RM LISTENING MODE MEMORY

THX

SURROUNDDIRECT STEREO

MEMORY

MODE

ENTER

TURN

SETUP

TUNI

PRESET

RECEIVER

DS797

DIMMER

TEST

DISPLAY

RCVR

SLEEP

CH SEL

DIMMER

LEVEL

Input source buttons

Adjusting the brightness of the front display

You can adjust the brightness of the front display of the TX-DS797

with DIMMER button on the remote controller or on the TX-DS797

front panel with other than European models.

TX-DS797 Remote controller

DIMMER

Switching the display

While listening to or watching an input source, you can display the

information regarding the type of source and signal being input by

pressing the DISPLAY button on the TX-DS797 or the remote

controller.

When an input source other than FM or AM is selected:

* If the input signal does not have a program format, then this will

be skipped.

Input + volume

Program format*

Input +

Listening mode

or Multi Ch

When FM or AM is selected as the input source:

FM/AM frequency +

Preset no.

FM/AM +

Listening mode

TX-DS797 Remote controller

DISPL

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 75 76

Comments to this Manuals

No comments

Onkyo TX-DS797 User Manual Page 52

Comments to this Manuals

Related products and manuals for Acoustics Onkyo TX-DS797