Onkyo A-9555 User Manual download pdf (Page 11)

Connecting the A-9755/A-9555—Continued

Connecting a Turntable

The A-9755/A-9555’s PHONO input jacks are for use

with moving-magnet (MM) type cartridges.

Use an analog audio cable to connect the

A-9755/A-9555’s PHONO L/R jacks to the audio out-

put jacks on the turntable, as shown.

Notes:

• If the turntable has a ground wire, connect it to

A-9755/A-9555’s GND terminal. With some turnta-

bles, connecting the ground wire may cause hum, in

which case it should be disconnected.

• If the turntable has a moving-coil (MC) type car-

tridge, you’ll need a commercially available MC

phono preamp. In this case, connect the turntable to

the phono preamp’s input, and connect the phono

preamp’s output to the A-9755/A-9555’s PHONO

L/R jacks.

Connecting a CD Player

Use an analog audio cable to connect the

A-9755/A-9555’s CD L/R jacks to the analog audio out-

put jacks on the CD player, as shown.

• Always refer to the instructions that came with the

component that you are connecting.

• Do not plug in the power cord until all connec-

tions have been properly made.

• Do not bind audio cables with power cords and

speaker cables. Doing so may adversely affect the

sound quality.

• To prevent interference, keep power cords and

speaker cables away from the tuner’s antenna.

RCA Audio Connection Color Coding

• Red connectors are used for the right channel, and

white connectors are used for the left channel.

• Push each plug in all the way to make a good con-

nection (loose connections can cause noise or

malfunctions).

Before Making any Connections

Left (white)

Right (red)

Wrong!

Right!

Audio Components

AUDIO OUT

Ground wire

ANALOG

OUT

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Onkyo A-9555 User Manual Page 11

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Onkyo A-9555