ONKYO 10345 Instruction Manual download pdf (Page 56)

En-56

Troubleshooting—Continued

No sound is heard from your turntable.

• Make sure the turntable has a built-in phono equalizer. If the turntable doesn’t have a phono equalizer built-in, you

must provide one.

The timers don’t work.

• Make sure the clock has been set correctly (see page 45).

• Timed operation will fail if the CBX-500/CBX-600UKD is on at the specified On time, so make sure it’s set to

Standby (see page 49).

• The timer may overlap with another timer. If you program several timers, make sure they don’t overlap (see page 47).

• If you press the [SLEEP] or [TIMER] button while a timed operation is in progress, the timer will be cancelled and

the CBX-500/CBX-600UKD won’t turn off at the specified Off time (see page 49).

• Make sure the timer is set to suitable volume setting (see page 49).

The clock displays “--:--”

• A power outage has occurred and the time setting lost. Set the clock again (see pages 17 and 45). The timers will all

be set to Timer Off, so you’ll need to turn on any necessary timers (see page 50). The timer settings will be preserved.

AccuClock appears on the display frequently or the clock is not set properly (CBX-500 European model and

CBX-600UKD).

• Make sure the AccuClock function is correctly configured for use with a specific station (see page 46).

• The signal from the station that the AccuClock function is configured to use is weak. Try another station (see

page 46).

• The station that the AccuClock function is configured to use is not broadcasting CT (Clock Time) information or does

not support RDS. Try another station (see page 46).

• The AccuClock function cannot set the clock. Set the clock manually (see page 45).

• Once a power outage has been fixed, the AccuClock function will run automatically.

AccuClock no longer works after moving the CBX-500 European model/CBX-600UKD or antenna.

• In step 4 of the “AccuClock with a Specific Station” procedure on page 46, try pressing the [MENU] button to change

the display to “FM---.--MHz,” and then press the [MODE] button.

• Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.

You want to turn off the AccuClock function (CBX-500 European model and CBX-600UKD).

• Set the clock manually (see page 45).

“RESET” appears on the display when the power cord is plugged in.

• The power cord has been disconnected for a long time, or a prolonged power outage occurred. All settings have

reverted to their factory defaults, so you’ll need to make any necessary settings again.

External Components

Timers

Clock

Others

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s

malfunction. Before you record important data, make sure that the material will be recorded correctly.

The CBX-500/CBX-600UKD contains a microcomputer. In very rare situations, severe interference, noise from an

external source, or static electricity may cause it to malfunction or lockup. In the unlikely event that this should

happen, unplug the power cord, wait at least 10 seconds, and then plug it back in again. If this doesn’t resolve the

issue, reset the CBX-500/CBX-600UKD to its factory defaults (see page 53).

1 2 ... 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments

ONKYO 10345 Instruction Manual Page 56

Comments to this Manuals

Related products and manuals for Docking speakers ONKYO 10345