Onkyo TX SR575 User Manual download pdf (Page 59)

Advanced Setup

—Continued

Notes:

• The Center and Subwoofer distances can be set up to

5 ft. (1.5 m) more or less than the Front distance. For

example, if the Front distance is set to 20 ft. (6 m), the

Center and Subwoofer distances can be set between 15

and 25 ft. (4.5 and 7.5 m).

• The Surround and Surround Back distances can be set

up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the

Front distance. For example, if the Front distance is set

to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R,

and Surr Back L distances can be set between 5 and 25

ft. (1.5 and 7.5 m).

• The speaker distance cannot be adjusted while a pair

of headphones is connected, speaker set B is on, or the

multichannel DVD input is being used.

Speaker Levels

You can set the volume level of each speaker so that all

speakers can be heard equally at the listening position.

Notes:

•A quick way to adjust the speaker levels is to press the

remote controller’s [TEST TONE] button to turn on

the test tone, use the [LEVEL–] and [LEVEL+] but-

tons to adjust the levels, and use the [CH SEL] button

to select the speakers.

• The speaker levels cannot be adjusted while a pair of

headphones is connected, speaker set B is on, or the

AV receiver is muted.

Press the [SETUP] button.

Setup closes.

Press the [RECEIVER] REMOTE

MODE button, followed by the

[SETUP] button.

Use the Up and Down [ ]/[ ]

buttons to select “Level Cal,” and

then press [ENTER].

A pink noise test tone is output by the

front left speaker.

SETUP

These settings are set automatically by the Automatic

Speaker Setup function (see page 35).

SETUP

RECEIVER

Turn up the volume so that you

can hear the test tone sufﬁ-

ciently.

As each speaker outputs the test tone,

its name appears on the display.

Use the Left and Right [ ]/[ ]

buttons to adjust the speaker

level, and use the Down [ ] but-

ton to select the next speaker.

The levels can be adjusted from –12 to

+12 dB in 1 dB steps (–15 to +12 dB

for the subwoofer).

Repeat step 4 so that the level of

the test tone coming from each

speaker is the same.

Speakers that you set to No or None in

the Speaker Conﬁguration (page 56) do

not output the test tone.

Press the [SETUP] button.

Setup closes.

Don’t forget to turn down the volume if

you turned it up while setting the levels.

SETUP

TX-SR505_En.book Page 59 Tuesday, January 30, 2007 11:53 AM

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 71 72

Comments to this Manuals

No comments

Onkyo TX SR575 User Manual Page 59

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Onkyo TX SR575