Onkyo TX SR575 User Manual download pdf (Page 57)

Advanced Setup

—Continued

Note:

• These settings cannot be changed while headphones

are connected, speaker set B is on, or the multichannel

DVD input is being used.

Crossover Frequency

This setting only applies to the speakers that you speci-

ﬁed as

Small

in the “Speaker Conﬁguration” on page 56.

To get the best bass performance from your speaker sys-

tem, you need to set the crossover frequency according

to the size and frequency response of your speakers

Notes:

•For a more accurate setting, look up the frequency

response in the manuals supplied with your speakers

and set accordingly.

• Choose a higher crossover frequency if you want more

sound from your subwoofer.

• These settings cannot be changed while headphones

are connected, speaker set B is on, or the multichannel

DVD input is being used.

Use the Down [ ] button to

select “Surr Back,” and use the

Left and Right [ ]/[ ] buttons to

select

Small

Large

, or

None

Small:

Select if the surround back

speakers are small.

Large:

Select if the surround back

speakers are large.

None:

Select if no surround back

speakers are connected.

Notes:

• If the Surround setting in step 6 is set

to None, this setting does not appear.

• If the Surround setting in step 6 is set

to Small, the Large option cannot be

selected.

Use the Down [ ] button to

select “Surr Back Ch,” and use

the Left and Right [ ]/[ ] but-

tons to select

2ch

1ch

2ch:

Select if two (left and right)

surround back speakers are

connected.

1ch:

Select if one surround back

speaker is connected.

Note:

• If the Surround and Surr Back set-

tings in steps 6 and 7 are set to None,

this setting does not appear.

Continue with step 9 of the “Crossover

Frequency” setting.

Use the Down [ ] button to

select “Crossover,” and then use

the Left and Right [ ]/[ ] but-

tons to select a crossover fre-

quency.

Use the diameter of the smallest

speaker in your system when choosing

the crossover frequency.

*Choose the setting suitable for the speaker.

Continue with step 10 of the “Double

Bass” setting on the next page.

This setting is set automatically by the Automatic

Speaker Setup function (see page 35).

Speaker cone

diameter

Crossover

frequency

Over 8 in.

(20 cm)

40/50/60Hz*

6-1/2 to 8 in.

(16–20 cm)

80Hz

5-1/4 to 6-1/2 in.

(13–16 cm)

100Hz (default)

3-1/2 to 5-1/4 in.

(9–13 cm)

120Hz

Under 3-1/2 in.

(9 cm)

150/200Hz*

TX-SR505_En.book Page 57 Tuesday, January 30, 2007 11:53 AM

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

Comments to this Manuals

No comments

Onkyo TX SR575 User Manual Page 57

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Onkyo TX SR575