Onkyo TX SR575 User Manual download pdf (Page 27)

Connecting Your Components

—Continued

If you have an HDMI-compatible player, you can connect it to the AV receiver with an HDMI cable.

Notes:

• Audio and video signals received via the HDMI IN jacks are output only by the HDMI OUT.

• Audio and video signals received via inputs other than the HDMI IN jacks are not output by the HDMI OUT.

• The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input

can be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll

need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed.

In addition, video signals from a PC are not supported.

•To watch an HDMI source that’s connected via the AV receiver’s HDMI jacks, the AV receiver must be turned on,

otherwise no HDMI signal will be output.

• The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If

the picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the

connected component’s instruction manual for details.

TX-SR505 North American Model/TX-SR505E/TX-SR575 Only

Connecting Components with HDMI

Step 1: Connect your HDMI-compatible TV to the AV receiver’s HDMI OUT jack.

Step 2: Connect your HDMI-compatible player to the AV receiver’s HDMI IN 1 or 2 jack.

Step 3: Connect your HDMI-compatible player to an analog and/or digital audio input on the AV

receiver.

✽ Audio and video signals received via the HDMI IN 1 and 2 jacks are output by the HDMI OUT jack as they

are (HDMI pass-through), so even if you only make the connections in steps 1 and 2, your TV will output

sound. However, if you want to listen through the speakers connected to the AV receiver, in addition to an

HDMI connection, you’ll also need to make a separate analog or digital audio connection.

Step 4: Assign the HDMI IN.

Turn on the AV receiver, and then assign the HDMI IN (see page 38)

OUT

CBL/SAT IN

IN IN

VCR/DVR IN

DVD IN

OUT

COMPONENT VIDEO

B/PB

CR/PR

IN 1IN 2

OUT

ANTENNA

SUB

WOOFER

FRONT

SURROUND

SURR BACK

CENTER

TAPE

OUT

CBL/SAT

VCR/DVR

DVD

MONITOR

OUT

SURROUND BACK

SPEAKERS

REMOTE

CONTROL

HDMI

ASSIGNABLE

COAX-

IAL

OPTICAL

(DVD)

(CBL/SAT)

(VCR/DVR)

(CD)

DIGITAL IN

HDMI

IN 1

HDMI

OUT

HDMIHDMI

ASSIGNABLE

Tip!

If you make the connection described in

step 3, to fully enjoy the AV receiver's lis-

tening modes, turn down the volume on

your TV all the way so that its speakers

output no sound.

Sound off

DVD player

Connect one

or the other

Step 1

Step 3 ✽

Step 2

TX-SR505_En.book Page 27 Tuesday, January 30, 2007 11:53 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

Comments to this Manuals

No comments

Onkyo TX SR575 User Manual Page 27

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Onkyo TX SR575