ONKYO DV-SP305 User Manual download pdf (Page 52)

Troubleshooting

If you have any trouble using your DV-SP305, check the following table for possible causes and remedies. If you still

can’t resolve the issue yourself, please contact your Onkyo dealer.

Symptoms Causes Remedies

DVD Player

Can’t turn on the

DV-SP305?

The power cord is not connected.

Connect the power cord to a suitable wall outlet

(page 21).

External interference is affecting the

DV-SP305’s digital circuitry.

Turn off the DV-SP305, wait five seconds, then try

turning it on again. If that fails, disconnect the

power cord from the wall outlet, wait five seconds,

reconnect it, then try turning it on again.

The disc tray won’t

close properly?

The disc is not centered in the disc tray.

Place the disc in the center of the disc tray

(page 24).

The disc is dirty. Remove the disc and clean it (page 9).

Can’t start playback?

No disc is loaded. Load a disc (page 24).

The disc cannot be played because it’s

incompatible.

Use only compatible discs (page 7).

The disc is upside down. Load the disc the correct way up (page 24).

The disc is not centered in the disc tray.

Place the disc in the center of the disc tray

(page 24).

The disc is dirty. Remove the disc and clean it (page 9).

The disc uses parental lock and the Paren-

tal Lock function is on.

Turn off the Parental Lock function (page 44).

The DVD-Video disc is intended for use in

another region.

If the region number on the disc does not match

the region number on the DV-SP305, the disc

can’t be played (page 48).

The picture distorts

occasionally?

The disc is dirty. Remove the disc and clean it (page 9).

You’re using the Fast Forward or Fast

Reverse function.

A little picture distortion may occur when using

these functions. This is normal.

Picture instability or

noise?

The DV-SP305 is connected to your TV

via a VCR or other video equipment and a

copy-protection system is affecting the

picture.

Connect the DV-SP305 directly to your TV

(page 17).

No picture?

The wrong input source is selected on

your TV.

On your TV, select the input to which the

DV-SP305 is connected.

The video cable is not connected properly.

Check the video cable and correct as necessary

(page 17).

Settings are not saved?

If there’s a power failure, or the power

cord is disconnected inadvertently, any

settings are lost.

Before you disconnect the power cord, set the

DV-SP305 to Standby by pressing the

[STANDBY/ON] button, and wait until “OFF”

has disappeared from the display.

Brightness is unstable

or the picture is noisy?

The DV-SP305 is connected to your TV

via a VCR or other video equipment and a

copy-protection system is affecting the

picture.

Connect the DV-SP305 directly to your TV

(page 17).

Your TV doesn’t support progressive

scanning.

Reset the DV-SP305 to its initial settings

(page 40).

Chapters or tracks don’t

play in the correct

order?

You are using repeat playback, program

playback, or random playback.

Select normal playback (pages 32–34).

Buttons on the

DV-SP305 and remote

controller don’t work?

Power supply voltage fluctuations and

other anomalies, such as static electricity,

can interfere with normal operation.

Turn off the DV-SP305, wait five seconds, then

turn it on again. If that doesn’t resolve the issue,

disconnect the power cord from the wall outlet,

wait five seconds, reconnect it, then try again.

1 2 ... 47 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments

ONKYO DV-SP305 User Manual Page 52

Comments to this Manuals

Related products and manuals for DVD players ONKYO DV-SP305