ONKYO TX-NR509 Instruction Manual Page 68
- Page / 76
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
68
En
The AV receiver allows you to update the firmware using
a USB device.
Note
• Never unplug or turn off the AV receiver during the update
process.
• Never plug or unplug an HDMI cable or a USB device during the
update process.
• Never unplug the USB storage device containing the firmware
file or the AC power cord during the update process.
• Do not attempt to access the AV receiver from your PC while it
is being updated.
• It takes about 30 minutes to complete the firmware update.
• The AV receiver will retain all your settings after the update is
finished.
Before you start
• Set the “HDMI Ctrl (RIHD)” setting to “Off”
(➔ page 48).
• Turn off the controller device connected via Ethernet
cable.
• Turn off Zone 2.
• Stop playback of contents from Internet Radio,
iPod/iPhone, USB or servers, etc.
• If there is any data in the USB device, remove it first.
Update procedure
Updating the Firmware via USB
1
Connect a USB device to your PC. If there is any
data in the USB device, remove it first.
2
Download the firmware file from the Onkyo web
site. The file name is as follows:
ONKAVR****_************.zip
Unzip the downloaded file. The following three
files are created:
ONKAVR****_************.of1
ONKAVR****_************.of2
ONKAVR****_************.of3
3
Copy the extracted files to the USB device. Be
careful not to copy the zip file.
4
Remove the USB device from your PC and
connect it to the USB port on the AV receiver.
5
Make sure the AV receiver and TV are turned on.
If the AV receiver is in standby mode, press
8ON/STANDBY on the AV receiver to light the
front display.
6
Select the USB input source.
“Now Initializing” is displayed on the front display
and then the name of the USB device is displayed. It
takes 20 to 30 seconds to recognize the USB device.
7
Press RECEIVER followed by SETUP on the
remote controller.
Setup menu will be displayed on the TV screen. The
procedures thereafter can also be performed on the
AV receiver by using its SETUP, arrow and
ENTER buttons.
8
Select “Update” and press ENTER.
9
Select “Via USB” and press ENTER.
10
Select “Update” and press ENTER.
The update process will begin.
During the update process, the on-screen display
may disappear depending on the updated program.
When this occurs, you can still view the update
progress on the front display of the AV receiver. The
on-screen display will reappear after the update is
complete, and upon turning the AV receiver off and
on again.
Do not turn off the AV receiver and do not remove
the USB device during the update process.
11
The message “Completed!” appears on the front
display of the AV receiver, indicating that the
update has been completed.
12
Using 8ON/STANDBY on the front panel, turn
off the AV receiver and then remove the USB
device.
Do not use 8RECEIVER on the remote controller.
Congratulations! You now have the latest firmware
installed on your Onkyo AV receiver.
- TX-NR509 1
- Important Safety Instructions 2
- For U.S. models 3
- For Canadian Models 3
- Modèle pour les Canadien 3
- Supplied Accessories 4
- Contents 5
- Features 6
- Front Panel 7
- Rear Panel 9
- Remote Controller 10
- Connecting the AV Receiver 11
- Speaker Configuration 12
- Using a Powered Subwoofer 13
- About AV Connections 14
- Connecting Your Components 16
- Connecting Onkyo u Components 17
- Connecting the Power Cord 18
- Connecting the Antennas 18
- Turning On 19
- Turning Off 19
- Playback 20
- Standard Mode control 21
- Playing a USB Device 22
- Listening to Internet Radio 22
- Registering Presets 23
- Remote Playback 24
- Listening to AM/FM Radio 25
- Presetting AM/FM Stations 26
- Taiwan models) 26
- Using Basic Functions 28
- Error Messages 29
- Using the Listening Modes 31
- About Listening Modes 32
- ■ Listening Modes 33
- Neo 6:Neo 6 C i nema: 35
- Neo 6 Music: 35
- Using the Home Menu 36
- Using the Sleep Timer 36
- Displaying Source Information 36
- Changing the Input Display 37
- Using the Music Optimizer 37
- Muting the AV Receiver 37
- Using Headphones 37
- Recording 37
- Camcorder 38
- VCRCD player 38
- : Video signal 38
- : Audio signal 38
- Advanced Setup 39
- HDMI Input 40
- Level Cal (Level Calibration) 42
- Menu Audio Adjust 43
- Audio Adjust 43
- Source Setup 44
- A/V Sync 45
- Hardware 46
- Auto Standby 47
- “On”, change the setting 48
- Network Setup 49
- Tone Control 50
- Speaker Levels 50
- Audyssey 51
- Late Night Function 51
- Music Optimizer 51
- CinemaFILTER 51
- Making Zone 2 Connections 52
- Controlling Zone 2 Components 52
- Using the Onkyo Dock 53
- Controlling Your iPod/iPhone 54
- ✔: Available buttons 55
- Controlling Other Components 56
- Resetting REMOTE MODE Buttons 57
- RECEIVER 59
- UP-A1 Dock for iPod/iPhone 61
- Network/USB Features 64
- USB Device Requirements 65
- Supported Audio File Formats 65
- About DLNA 65
- Firmware Update 66
- Troubleshooting 67
- Before you start 68
- Update procedure 68
- Updating the Firmware via USB 68
- MONITOR OUT 70
- About HDMI 71
- About p-compatible components 72
- Specifications 74
Related products and manuals for AV receivers ONKYO TX-NR509
AV receivers ONKYO TX-SR577 B Instruction Manual
(100 pages)
(100 pages)
AV receivers ONKYO A-933 Instruction Manual
(24 pages)
(24 pages)
AV receivers ONKYO TX-NR3007 Instruction Manual
(164 pages)
(164 pages)
AV receivers ONKYO A-9755 Instruction Manual
(20 pages)
(20 pages)
© 2020, manymanuals.com. All rights reserved. | 1.011 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals