Onkyo TX-SR603X User Manual download pdf (Page 70)

Advanced Setup

—Continued

You can assign a default listening mode to each input

source that will be selected automatically when you

select each input source. For example, you can set the

default listening mode to be used with Dolby Digital

input signals. You can select other listening modes dur-

ing playback, but the mode speciﬁed here will be

resumed once the AV receiver has been set to Standby.

Note:

This procedure can also be performed on the AV receiver

by using its [SETUP] button, arrow buttons, and

[ENTER] button.

Assigning Listening Modes to Input

Sources

Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

The main menu appears onscreen.

Use the Up and Down [ ]/[ ]

buttons to select “7. Input

Setup,” and then press [ENTER].

The Input Setup menu appears.

Use the INPUT SELECTOR but-

tons on the remote controller to

select the input source that you

want to set.

For input selectors that have no digital

input jacks, only “b. Analog” will be

available.

RECEIVER

ENTER

Use the Up and Down [ ]/[ ]

buttons to select the signal for-

mat that you want to set, and

then use the Left and Right [ ]/

[ ] buttons to select a listening

mode.

Only listening modes that can be used

with each input signal format can be

selected.

For “Surround,” the listening mode

speciﬁed on page 69 will be used.

The Last Valid option means that the

listening mode selected last will be

used.

b. Ana/PCM:

With this setting, you

can specify the listening mode to be

used when an analog (CD, TV, LD,

VHS, MD, turntable, radio, cassette,

cable, satellite, etc.) or PCM digital

(CD, DVD, etc.) audio signal is played.

c. Dolby D:

With this setting, you can

specify the listening mode to be used

when a Dolby Digital format digital

audio signal is played (DVD, etc.).

d. DTS:

With this setting, you can

specify the listening mode to be used

when a DTS format digital audio signal

is played (DVD, LD, CD, etc.).

e. D.F. 2ch:

With this setting, you can

specify the listening mode to be used

when a 2-channel (2/0) digital audio

signal (Dolby Digital, DTS) is played

(DVD, etc.).

f. Mono:

With this setting, you can

specify the listening mode to be used

when a mono digital audio signal is

played (DVD, etc.).

g. Multich:

This setting is available

only when DVD or MULTI CH is

selected with INPUT SELECTOR.

With this setting, you can specify the

listening mode to be used when the

DVD analog multichannel input is

used.

When you’ve ﬁnished, press the

[SETUP] button.

The setup menu closes.

ENTER

TXSR603X.book 70 ページ２００５年８月３日水曜日午後２時２分

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 87 88

Comments to this Manuals

No comments

Onkyo TX-SR603X User Manual Page 70

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Onkyo TX-SR603X