Onkyo TX-NR1007 User Manual

EnAV ReceiverTX-NR1007Instruction ManualThank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections an

10Front & Rear Panels—Continuedw SETUP MIC jack (57)Audyssey MultEQ®XT Room Correction and Speaker Setup microphone connects here.x AUX INPUT (37)

100Advanced Setup—ContinuedName EditYou can enter a custom name for each individual input selector (excluding TUNER) and radio preset for easy identi-

101Advanced Setup—ContinuedZoom ModeThis setting determines the aspect ratio.Note:When the “Game Mode” is set to “On”, the “Zoom Mode” is fixed at “Fu

102Advanced Setup—ContinuedISF Mode Custom: User setting (All items can be freely set.)Day: Setting when a room is bright.Night: Setting when a room i

103Advanced Setup—ContinuedBrightness*1–50 to +50 (default: 0)With this setting you can adjust the picture brightness. “–50” is the darkest. “+50” is

104Advanced Setup—ContinuedYou can assign a default listening mode to each input source that will be selected automatically when you select each input

105Advanced Setup—ContinuedThis section explains the items on the “Miscellaneous” menu.Note:This procedure can also be performed on the AV receiver by

106Advanced Setup—Continued.This section explains items on the “Hardware Setup” menu.Note:This procedure can also be performed on the AV receiver by u

107Advanced Setup—ContinuedRemote IDRemote ID 1, 2, 3When several Onkyo components are used in the same room, their remote ID codes may overlap. To di

108Advanced Setup—ContinuedHDMIAudio TV Out Off: HDMI audio is not output to TV (default).On: HDMI audio is output to TV and the sound will be heard f

109Advanced Setup—ContinuedHDMI Control (RIHD) On: enabled.Off: disabled (default).This function allows -compatible components connected via HDMI

11Front & Rear Panels—Continuedf Tuning indicatorsRDS (European models) (70):Lights when tuned to a radio station that supports RDS (Radio Data Sy

110Advanced Setup—ContinuedNetworkSee “Network Settings” on page 121.Firmware UpdateNotes:• Perform the firmware update only when an announcement is p

111Advanced Setup—ContinuedWith this preference, you can protect your settings by locking the setup menus.Note:This procedure can also be performed on

112Advanced Setup—ContinuedYou can change various audio settings by pressing the [AUDIO] button.Note:When the “Audio TV Out” setting is set to “On” (p

113Advanced Setup—ContinuedRe-EQ FunctionWith the Re-EQ function, you can compensate a soundtrack whose high-frequency content is too harsh, making it

114Advanced Setup—ContinuedSpeaker LevelsYou can adjust the volume of each speaker while listening to an input source.These temporary adjustments are

115NETThe AV receiver is network-ready, which means you can hook it up to your home network with a standard Ether-net cable and enjoy the music files

116NET—ContinuedTo receive Internet radio, you must connect the AV receiver to a network with Internet access (page 115).You can select Internet radio

117NET—ContinuedThis section explains how to play music files on a com-puter or media server through the AV receiver. See page 115 for details on supp

118NET—ContinuedRandom PlaybackThe Random function can only be set while the PLAY screen is displayed.To play songs in random order, during playback (

119NET—ContinuedSupported Audio File FormatsFor server playback, the AV receiver supports the fol-lowing music file formats: MP3, WMA, WAV, FLAC, Ogg

12Front & Rear Panels—Continuedd DIGITAL COAXIAL IN 1, 2, and 3These coaxial digital audio inputs are for connect-ing components with coaxial digi

120NET—ContinuedServer RequirementsThe AV receiver can play digital music files stored on a computer or media server and supports the following techno

121NET—ContinuedNote:When modifying network settings, after modifying it is necessary to execute “Save”.This section explains how to configure the AV

122NET—ContinuedMac AddressThis is the AV receiver’s MAC (Media Access Control) address. This address cannot be changed.DHCPThis setting determines wh

123Multi ZoneYou can use three speaker systems with this AV receiver—a surround-sound speaker system (up to 9.2 channels) in your main listening room,

124Multi Zone—ContinuedIn addition to your main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can

125Multi Zone—ContinuedZone 2 Video OutputThe AV receiver features a composite video output for connection to a TV in Zone 2, so you can enjoy both au

126Multi Zone—ContinuedThere are two ways you can connect Zone 3 speakers:1. Connect them directly to the AV receiver.2. Connect them to an amp in Zon

127Multi Zone—ContinuedIf you’ve connected your Zone 2/3 speakers to the AV receiver, as explained in “Connecting Your Zone 2 Speakers Directly to the

128Multi Zone—ContinuedNote:This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Z

129Multi Zone—ContinuedThis section explains how to turn Zone 2/3 on and off, how to select an input source for Zone 2/3, and how to adjust the volume

13Front & Rear Panels—Continuedx MULTI CH input: FRONT L/R, CENTER, SUBWOOFER, SURR L/R, and SURR BACK L/RThis analog multichannel input is for co

130Multi Zone—ContinuedNotes:• Only analog input sources are output by the ZONE 2/3 PRE OUT and ZONE 2/3 L/R speaker terminals. Digital input sources

131Multi Zone—ContinuedTo control the AV receiver with the remote controller while you’re in Zone 2 or Zone 3, you’ll need a commer-cially available m

132Controlling Other ComponentsYou can use the AV receiver’s remote controller (RC-745M) to control your other AV components, including those made by

133Controlling Other Components—Continued5Use the Up and Down [q]/[w] but-tons to select category, and then press [ENTER].The brand name input panel a

134Controlling Other Components—ContinuedYou’ll need to enter a code for each component that you want to control.Note:The remote control codes provide

135Controlling Other Components—ContinuedOnkyo components that are connected via u are con-trolled by pointing the remote controller at the AV receive

136Controlling Other Components—ContinuedBy pressing the [TV] button that’s been programmed with the remote control code for TV, you can control your

137Controlling Other Components—ContinuedBy pressing the REMOTE MODE button that’s been programmed with the remote control code for your DVD player (H

138Controlling Other Components—Continuedt PLAY MODE button*Selects play modes on components with selectable play modes.u CLR buttonCancels functions

139Controlling Other Components—ContinuedBy pressing the REMOTE MODE button that’s been programmed with the remote control code for your sat-ellite re

14Remote ControllerNotes:• If the remote controller doesn’t work reliably, try replacing the batteries.• Don’t mix new and old batteries or different

140Controlling Other Components—ContinuedBy pressing the REMOTE MODE button that’s been programmed with the remote control code for your CD player, CD

141Controlling Other Components—ContinuedBy pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can

142Controlling Other Components—Continuedr PLAY MODE buttonSelects play modes on components with selectable play modes.Works as a Resume button when u

143Controlling Other Components—ContinuedVia onscreen menu, you can specify what actions will be taken by the Easy macro command in the Easy macro mod

144Controlling Other Components—ContinuedHere are the default settings.Source PlayEnable: Start playback the source of “Enable”.Disable: Start playb

145Controlling Other Components—ContinuedThe AV receiver’s remote controller can learn the com-mands of other remote controllers. By transmitting, for

146Controlling Other Components—ContinuedYou can program the remote controller’s ACTIVITIES buttons to perform a sequence of remote control actions.Ex

147TroubleshootingIf you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact

148Troubleshooting—ContinuedThe surround speakers produce no sound• When the DTS Surround Sensation, T-D (Theater-Dimensional), Stereo or Mono listeni

149Troubleshooting—Continued• With some CD and LD players, you won’t be able to playback DTS material properly even though your player is connected to

15Remote Controller—ContinuedFor detailed information, see the pages in parentheses.a STANDBY button (43)Sets the AV receiver to Standby.b ON button (

150Troubleshooting—ContinuedThe remote controller doesn’t work• Make sure that the batteries are installed with the cor-rect polarity (page 14).• Inst

151Troubleshooting—ContinuedCan’t record• On your recorder, make sure the correct input is selected.• To prevent signal loops and damage to the AV rec

152Troubleshooting—ContinuedThe following settings can be made for the S-Video, composite video and COMPONENT VIDEO inputsYou must use the buttons on

153SpecificationsAmplifier SectionVideo SectionTuner SectionGeneral Video Inputs Video Outputs Audio Inputs Audio Outputs Control TerminalSpecifi

154Video Resolution ChartThe following tables show how video signals at different resolutions are output by the AV receiver.*1: The output is limited

155Memo

156SN 29400052Y0907-1(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.http://www.onkyo.com/HOMEPAGESales & Product Planning Div. :

16Remote Controller—Continued Controlling the tunerTo control the AV receiver’s tuner, press the [TUNER] (or [RECEIVER]) button.You can select AM or

17About Home TheaterThanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just

18Connecting the AV receiverSpeaker ConfigurationFor 9.2-channel surround-sound playback, you need nine speakers and two powered subwoofers.The follow

19Connecting the AV receiver—ContinuedUsing Dipole SpeakersYou can use dipole speakers for the surround left and right, surround back left and right s

2Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this

20Connecting the AV receiver—ContinuedConnecting the Speaker CablesThe following illustration shows which speaker should be connected to each pair of

21Connecting the AV receiver—ContinuedThe FRONT L/R and SURR BACK/ZONE 3 L/R termi-nal posts can be used with front speakers and surround back speaker

22Connecting the AV receiver—ContinuedThis section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect comm

23Connecting the AV receiver—ContinuedConnecting an Outdoor FM AntennaIf you cannot achieve good reception with the supplied indoor FM antenna, try a

24Connecting the AV receiver—Continued• Before making any AV connections, read the manuals supplied with your other AV components.• Don’t connect the

25Connecting the AV receiver—ContinuedAbout HDMIDesigned to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a

26Connecting the AV receiver—ContinuedMaking HDMI Connections Video SignalsDigital video signals received by the HDMI IN jacks are normally output by

27Connecting the AV receiver—ContinuedBy connecting both the audio and video outputs of your DVD/BD player and other AV components to the AV receiver,

28Connecting the AV receiver—Continued “Monitor Out” Setting Set to “Both”, “Both (Main)” or “Both (Sub)”With the “Monitor Out” setting set to “Both”

29Connecting the AV receiver—ContinuedAudio Connection FormatsAudio equipment can be connected to the AV receiver by using any of the following audio

3Precautions1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal with-out the permission of the copyrig

30Connecting the AV receiver—ContinuedSee “Connecting Components with HDMI” on page 25 for HDMI connection information.• With connection , you can li

31Connecting the AV receiver—ContinuedSee “Connecting Components with HDMI” on page 25 for HDMI connection information.• With connection , you can li

32Connecting the AV receiver—ContinuedHooking Up the Multichannel InputIf your DVD player supports multichannel audio formats such as DVD-Audio and Su

33Connecting the AV receiver—ContinuedWith this hookup, you can use your VCR’s tuner to listen to your favorite TV programs via the AV receiver, usefu

34Connecting the AV receiver—ContinuedNotes:• The AV receiver must be turned on for recording. Recording is not possible while it’s in Standby mode.•

35Connecting the AV receiver—ContinuedWith this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs via the AV

36Connecting the AV receiver—Continued• With connection , you can listen to and record audio from your game console or listen in Zone 2 or Zone 3.• T

37Connecting the AV receiver—ContinuedConnecting a Camcorder or Other DeviceConnection AV receiver Signal flow Camcorder etc.AUX INPUT VIDEO ⇐ Compos

38Connecting the AV receiver—Continued CD Player or Turntable (MM) with Built-in Phono Preamp• With connection , you can listen to and record audio

39Connecting the AV receiver—Continued• With connection , you can play and record or listen in Zone 2 or Zone 3.• To connect the recorder digitally f

4Precautions—ContinuedFor British modelsReplacement and mounting of an AC plug on the power supply cord of this unit should be performed only by quali

40Connecting the AV receiver—ContinuedIf you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OU

41Connecting the AV receiver—Continued If Your iPod Supports Video:Connect your RI Dock’s audio output jacks to the AV receiver’s GAME IN or VCR/DVR

42Connecting the AV receiver—ContinuedWith u (Remote Interactive), you can use the follow-ing special functions: Auto Power On/StandbyWhen you start

43Turning On the AV receiverEuropean and Asian models: To completely shut down the AV receiver, set the [POWER] switch to the OFF position ().ON/STAND

44First Time SetupThis section explains the settings that you need to make before using the AV receiver for the very first time.If you connect your TV

45First Time Setup—ContinuedIn this Instruction Manual, illustrations from the onscreen menu or explanations referring to the menu will be in the same

46First Time Setup—ContinuedCarry out the settings for the AV receiver by using the Onscreen Setup Menu.The settings of the AV receiver can be changed

47First Time Setup—ContinuedIf you connect your TV to the HDMI output, set the “Monitor Out” setting so that the onscreen setup menus are displayed an

48First Time Setup—ContinuedNotes:• See page 27 for charts showing how the “Monitor Out” and “Resolution” settings affect the video signal flow throug

49First Time Setup—ContinuedHDMI Input Setup If you connect a video component to HDMI IN, you must assign that input to an input selector. For example

5ContentsImportant Safety Instructions... 2Precautions ...

50First Time Setup—ContinuedComponent Video Input SetupIf you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, i

51First Time Setup—ContinuedIf you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you co

52First Time Setup—ContinuedIf you connect a component to the AV receiver’s analog multichannel input, you must assign that input to an input selector

53First Time Setup—ContinuedIf the impedance of any speaker is 4 ohms or more but less than 6, set the minimum speaker impedance to 4 ohms.If you’ve c

54First Time Setup—ContinuedFor the onscreen setup menus to display properly, you must specify the TV system used in your area.Note:This procedure can

55First Time Setup—ContinuedNote:This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] butto

56First Time Setup—ContinuedWith the supplied calibrated microphone, Audyssey MultEQ XT automatically determines the number of speakers connected, the

57First Time Setup—ContinuedUsing Audyssey MultEQ® XTENTER ON/STANDBY qwer Speaker setup microphoneNotes:• If any of your speakers is 4 ohms, change “

58First Time Setup—Continued• Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows, silence cell phon

59First Time Setup—ContinuedNotes:• When the room correction and speaker setup is complete, the “Equalizer Settings” (page 93) will be set to “Audysse

6FeaturesAmplifier• 135 Watts/Channel @ 8 ohms (FTC)• 180 Watts/Channel @ 6 ohms (IEC)• 230 Watts/Channel @ 6 ohms (JEITA)• WRAT–Wide Range Amplifier

60First Time Setup—ContinuedOne of the front speakers has not been detected.One of the front wide speakers has not been detected.One of the front high

61First Time Setup—ContinuedThe speaker type detected does not match what was expected. The speaker may be incorrect type or bro-ken. Please check tha

62Basic OperationsThis section explains how to select the input source (i.e., the AV component that you want to listen to or watch).Selecting the Inpu

63Basic Operations—ContinuedYou can adjust the bass and treble for the front speakers, except when the Direct, Pure Audio or THX listening mode is sel

64Basic Operations—ContinuedYou can adjust the brightness of the AV receiver’s dis-play.You can temporarily mute the output of the AV receiver.Tip:You

65Basic Operations—ContinuedYou can select the priority of the use of Front High speakers or Front Wide speakers.Notes:• If the Powered Zone 2 is bein

66Basic Operations—ContinuedUsing the Easy macro command in the Easy macro mode, you can sequentially operate Onkyo components with simple commands by

67Basic Operations—ContinuedChanging Source ComponentWhen you want to operate the component that is not assigned as the source component, you can assi

68Listening to the RadioWith the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick sele

69Listening to the Radio—ContinuedYou can store a combination of up to 40 of your favorite AM/FM radio stations as presets.Note:You can name your radi

7Features—Continued*6.HD Radio™ and the HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corporation.To receive HD Radio broadcasts,

70Listening to the Radio—ContinuedRDS only works in areas where RDS broadcasts are available. When tuned into an RDS station, the RDS indicator appear

71Listening to the Radio—ContinuedWhen tuned to an RDS station that’s broadcasting text information, the text can be displayed.Displaying Radio Text (

72Universal Port Option UP-A1 Dock for iPodWith the UP-A1 Dock (sold separately), you can easily play the music, photo, or movie stored on your Apple

73Universal Port Option UP-A1 Dock for iPod—ContinuedBy pressing the REMOTE MODE button that’s been programmed with the remote control code for your D

74Universal Port Option UP-A1 Dock for iPod—ContinuedStatus messages❏ PORT ReadingThe AV receiver is checking the connection with the dock.❏ PORT Not

75RecordingThis section explains how to record the selected input source to a component with recording capability, and how to record audio and video f

76Using the Listening ModesSee “About the Listening Modes” on page 84 for detailed information about the listening modes.Selecting on the AV receiver

77Using the Listening Modes—ContinuedMono/Multiplex Sources✔: Available Listening ModesNotes:*1 For 7ch output, output can be switched between Front h

78Using the Listening Modes—ContinuedStereo Source (1/2) ✔: Available Listening ModesListening Mode ButtonSpeaker layoutPure Audio*5✔✔✔✔Direct ✔✔✔✔Ste

79Using the Listening Modes—ContinuedStereo Source (2/2) ✔: Available Listening ModesNotes:*1 For 7ch output, output can be switched between Front hig

8Front & Rear PanelsThe actual front panel has various logos printed on it. They are not shown here for clarity.The page numbers in parentheses sh

80Using the Listening Modes—Continued5.1 channel Sources (1/3)✔: Available Listening ModesListening Mode ButtonSpeaker layoutPure Audio*5✔✔✔✔Direct ✔✔

81Using the Listening Modes—Continued5.1 channel Sources (2/3)✔: Available Listening ModesListening Mode ButtonSpeaker layoutPLIIx MusicTHX Music✔PLII

82Using the Listening Modes—Continued5.1 channel Sources (3/3)✔: Available Listening ModesNotes:*1 For 7ch output, output can be switched between Fron

83Using the Listening Modes—Continued7.1 channel Sources✔: Available Listening ModesListening Mode ButtonSpeaker layoutPure Audio*5✔✔✔✔Direct ✔✔✔✔Ster

84Using the Listening Modes—ContinuedNotes:*1 For 7ch output, output can be switched between Front high or Front wide speakers by pressing the [SP LAY

85Using the Listening Modes—Continued5.1-channel source + Dolby EXThese modes expand 5.1-channel sources for 6.1/7.1-channel playback. They’re especia

86Using the Listening Modes—ContinuedTHXFounded by George Lucas, THX develops stringent stan-dards that ensure movies are reproduced in movie the-ater

87Advanced SetupThe onscreen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s various settings. Setting

88Advanced Setup—ContinuedThis section explains items on the “Input/Output Assign” menu.Note:This procedure can also be performed on the AV receiver b

89Advanced Setup—ContinuedComponent Video InputSee “Component Video Input Setup” on page 50.Digital Audio InputSee “Digital Audio Input Setup” on page

9Front & Rear Panels—Continued(North American models)(European and Asian models)The page numbers in parentheses show where you can find the main e

90Advanced Setup—ContinuedSome of the settings in this section are set automatically by Audyssey MultEQ® XT Room Correction and Speaker Setup (see pag

91Advanced Setup—ContinuedSurr Back Ch*71ch: Select if only one surround back L speaker is connected.2ch: Select if two (left and right) surround ba

92Advanced Setup—ContinuedSpeaker DistanceThis setting is set automatically by Audyssey MultEQ® XT Room Correction and Speaker Setup (see page 56).Her

93Advanced Setup—ContinuedEqualizer SettingsThis setting is set automatically by Audyssey MultEQ® XT Room Correction and Speaker Setup (see page 56).W

94Advanced Setup—ContinuedTHX Audio SetupThis setting is not set automatically by Audyssey MultEQ® XT Room Correction and Speaker Setup (see page 56).

95Advanced Setup—ContinuedWith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.Note:This procedure c

96Advanced Setup—ContinuedDolbyPLIIx Music (2ch Input)These settings apply to only 2-channel stereo sources.If you’re not using any surround back spea

97Advanced Setup—ContinuedAudysseyFor “Dynamic EQ”, “Reference Level” and “Dynamic Volume”, you cannot change the settings before completing Audyssey

98Advanced Setup—ContinuedTheater-DimensionalListening Angle Wide: Select if the listening angle is greater than 30 degrees (default).Narrow: Select i

99Advanced Setup—ContinuedThis section explains items on the “Source Setup” menu. Items can be set individually for each input selector.Note:This proc