Onkyo ED-901 User Manual download pdf (Page 9)

Operation

1. Turn on the power of the sur-

round receiver.

Perform the necessary settings, such as

adjusting output level of each channel,

on the surround receiver.

See the instruction manual of your

surround receiver for details.

2. Set the surround receiver’s Input

Selector as follows:

TX-SV919THX: “VIDEO-4”

TX-SV828THX: “VIDEO-1”

Then, select the External Decoder mode

on the surround receiver.

(See also "For connection to the Onkyo

TX-SV919THX/TX-SV828THX

surround receiver..." on page 8.)

3. Press the POWER button on the

ED-901 to turn it on.

4. Press the INPUT 1 (VDP) or

INPUT 2 (DVD) input selector

button.

The LED for the selected input source

will light.

5. Play the AC-3 sound source.

The PROGRAM STATUS indicator

will appear on the display.

Note:

• Before performing the following procedure, make sure that the

ED-901 is properly connected to the surround receiver.

• To play Dolby Pro Logic sound sources...

The ED-901 is not equipped with a Dolby Pro Logic decoder.

To play Dolby Pro Logic sound sources, connect the ED-901 to

your receiver by audio cables and set the receiver's Input

Selector to Analog Input ("VIDEO-4" for the TX-SV919THX

and "VIDEO-1" for the TX-SV828THX).

POWER

ON OFF

INPUT 1 (VDP)

INPUT 2 (DVD)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Onkyo ED-901 User Manual Page 9