Onkyo DX-C370 User Manual download pdf (Page 7)

System Connections

Connecting to an audio system

Two types of output jacks are located on the rear panel.

Use the DIGITAL OUTPUT jack if you are connecting the unit to

audio equipment that supports a digital connection.

ANALOG OUTPUT jacks:

These are the most commonly used jacks. Connect these jacks to the

amplifier’s CD input jacks using the supplied audio connection cable.

DIGITAL OUTPUT (optical output) jack:

For digital recording, connect this jack to the digital input jack of a

Mini Disc recorder, a DAT deck, or other digital equipment. If your

amplifier has a digital input jack, connecting the DIGITAL OUT-

PUT jack to it will produce a much clearer and more dynamic sound.

• Terminal protection cap is attached to the digital jack.

Remove the cap when connecting the unit to other digital equip-

ment. When you are not using the digital output jack, replace the

cap.

• Refer to the amplifier’s instruction manual for connections.

• Do not plug in the power cord until all connections have been made.

• On each pair of input or output jacks, the jack marked R corresponds to the right channel and the jack marked L corresponds to the left

channel.

Connections for remote controller ( )

When connecting Onkyo products, it is necessary to attach the

cable to be able to use the remote controller of the main component

to control the entire system.

1. To use this CD changer with an amplifier (or receiver), cassette

tape deck, and tuner that include the appropriate jack, con-

nect the components using the cable, plugged into the RE-

MOTE CONTROL jacks.

2. As the exact connection sequence of the cable is unimpor-

tant, you can connect from the amplifier (or receiver) to either the

tuner, cassette tape deck, or compact disc changer.

3. To operate correctly, the remote controller must point toward the

remote control sensor of the amplifier (or receiver).

NOTES:

• The upper and lower REMOTE CONTROL jacks have the

same function.

• Remote controller operation is not possible when only the

cable is connected – the audio connection cables must also be

connected.

• An cable equipped with a 3.5mm (1/8 in.) diameter minia-

ture two-conductor phone plug is included with this unit and with

every tuner and cassette tape deck that utilizes the jack.

POWER

OFFON

11 22

Connecting the power

Before plugging in the unit, confirm that all

connections have been made properly.

1.1. Insert the AC power supply cord into

the outlet.

2.2. Press the POWER button.

• When the power first turns on, the carou-

sel rotates to find a disc and stops auto-

matically if there is a disc on the disc tray.

Audio

connection cable

Optical IN

cable

Amplifier

DAT, MD recorder or

Digital amplifier

Optical fiber cable

(not included)

DIGITAL

OUTPUT

OPTICAL

ANALOG

OUTPUT

COMPACT DISC PLAYER

MODEL NO.

C370

2-1, NISSHIN-CHO, NEYAGAWA-SHI, OSAKA,

JAPAN MANUFACTURED IN MALAYSIA

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

AVIS

REMOTE

CONTROL

"CLASS 1 LASER

PRODUCT"

RATING AC120V/220-230V

50/60Hz 10W

VOLTAGE SELECTOR

120V

220-230V

Voltage selector

(worldwide model only)

(See page 5)

To wall

outlet

To AC outlet

6 DISC

FIVE CD EXCHANGE CONTINUOUS PLAY

OPEN/CLOSE

PLAY

POWER

OFF

STOPPAUSE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6

NEXT SELECTION

DISPLAY

COMPACT DISC CHANGER

DX-C540

MEMORY CLEAR

DISC SKIP

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Onkyo DX-C370 User Manual Page 7

Comments to this Manuals

Related products and manuals for Acoustics Onkyo DX-C370