Onkyo HT-R960 User Manual download pdf (Page 85)

Advanced Setup

—Continued

These settings apply to only speaker set A.

Note:

• This procedure can also be performed on the AV

receiver by using its [SETUP], [ENTER], and arrow

buttons.

Surround Back SP Spacing Setting

This setting is only available if the Surr Back Ch setting

in the “Speaker Conﬁguration” on page 81 is set to 2ch.

With this setting, you can specify the distance between

your surround back speakers.

<1 ft (<0.3 m):

Select this if the speakers are between 0 and

1 foot (0–30 cm) apart.

1–4 ft (0.3–1.2 m):

Select this if the speakers are between 1 and

4 feet (0.3–1.2 m) apart.

>4 ft (>1.2 m) (Default):

Select this if the speakers are more than 4 feet

(1.2 m) apart.

BGC (Boundary Gain Compensation)

Setting

A room’s boundaries (i.e., walls) and their construction

may make bass sounds louder when the listening posi-

tion or subwoofer is positioned close to such a boundary.

This is called the boundary gain effect. With this setting,

you can compensate for this and achieve a more accurate

and ﬂatter bass response.

On:

Boundary Gain Compensation on.

Off:

Boundary Gain Compensation off (default).

Loudness Plus

THX Loudness Plus uses THX Multi-channel Spectral

Balancing and THX Dynamic Ambience Preservation

technologies to preserve the ambient sound and rich

detail of surround sound in movies, video games, and

music when listening at lower volume levels, providing

an accurate listening experience at any volume.

On:

Loudness Plus on.

Off:

Loudness Plus off.

THX Audio Setup

Press the [RECEIVER] REMOTE

MODE button, followed by the

[SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make

sure the appropriate external input is

selected on your TV.

Use the Up and Down [ ]/[ ]

buttons to select “2. Speaker

Setup,” and then press [ENTER].

Use the Up and Down [ ]/[ ]

buttons to select “5. THX Audio

Setup,” and then press [ENTER].

Use the Left and Right [ ]/[ ]

buttons to change the setting.

Press the Down [ ] button to

select the next setting.

Repeat this step for the other settings.

The THX Audio settings are explained

below.

These settings are not set automatically by the Auto-

matic Speaker Setup function (see page 42).

Press the [SETUP] button.

The setup menu closes.

HT-S9100THX_En.book Page 85 Friday, June 27, 2008 4:00 PM

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 111 112

Comments to this Manuals

No comments

Onkyo HT-R960 User Manual Page 85

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Onkyo HT-R960