ONKYO T-433 Instruction Manual download pdf (Page 15)

First Time Setup (European models only)

—Continued

Setting Accuclock to a Speciﬁc Station

The Accuclock function normally uses the FM station

with the strongest signal to set the clock. If the clock

cannot be set properly using that station, you can spec-

ify which FM station the Accuclock function uses. This

must be an FM station that supports RDS CT (Clock

Time) information.

Before proceeding, turn on the T-433.

Notes:

• If the clock does not set correctly, specify another FM

station and try again, or set the clock manually (see

page 21).

• If you don’t want the clock to be updated automati-

cally each day, you can turn off the Accuclock func-

tion (see page 15).

Selecting 12- or 24-hour Clock Display

Before proceeding, turn on the T-433.

Switching the Clock Display On or Off

While on Standby

Press the T-433’s [DISPLAY] button.

When the clock display is turned off, the ACCUCLOCK

indicator goes off.

Displaying the Clock & Day of the Week

(remote controller only)

Press the remote controller’s [CLOCK CALL] button.

Press the [CLOCK CALL] button again to turn off the

clock and day of the week display. You can save energy

by leaving the clock display turned off while the T-433

is on Standby.

Press the [TIMER] button.

“CLOCK” appears on the display.

If the clock has already been set, a

timer option appears instead. In this

case, you’ll need to press the [TIMER]

button repeatedly until “CLOCK”

appears.

Press the [MEMORY] button.

“AUTO” appears on the display. If

“MANUAL” appears, use the TUN-

ING/PRESET [ ]/[ ] buttons to

select “AUTO.”

Press the [MEMORY] button.

The display appears as shown.

Use the TUNING/PRESET

[ ]/[ ] buttons to tune into the

FM station.

The RDS indicator appears when tuned

into an RDS station, as shown.

Hint:

If you press the [MEMORY] button,

the T-433 will automatically search for

a suitable station.

STANDBY/ON

STANDBY

DISPLAY

ACCUCLOCK TUNING PRESET

KEY MODE TIMER

BAND TUNING

PRESET

FM MODE

CLEAR

MEMORY

TUNING/PRESET

TIMER

MEMORY

TUNING

PRESET

Press the [MEMORY] button.

While the clock is being set, “WAIT”

ﬂashes on the display. It may take a

few minutes to set the clock. When the

clock has been set, the message

“CLOCK ADJUSTED” scrolls across

the display, then the day and time are

displayed for a while.

Press the [TIMER] button repeat-

edly until “24H/12H” appears on

the display.

Press the [MEMORY] button.

Use the TUNING/PRESET

[ ]/[ ] buttons to select “24H”

or “12H.”

Press the [MEMORY] button.

The default setting is 24H.

MEMORY

DISPLAY

CLOCK

CALL

*En_T433_02.fm Page 15 Tuesday, February 15, 2005 3:09 PM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

ONKYO T-433 Instruction Manual Page 15

Comments to this Manuals