ONKYO DS-A2 Instruction Manual download pdf (Page 11)

11

Using the RI Dock—Continued

When the OSD mode is set to On, you can

change the background color and set the

screen saver.

1. Press the [MENU] button repeatedly to

select the top menu.

2. Use the Up and Down arrow [ ]/[ ] but-

tons to select “Settings,” and then press the

[SELECT] button.

3. Use the Up and Down arrow [ ]/[ ] but-

tons to select Background Color or Screen

Saver, and then press the [SELECT] button.

4. Use the Up and Down arrow [ ]/[ ] but-

tons to select an option, and then press the

[SELECT] button.

■ Background Color

You can change the background color of the

onscreen display on your TV to any one of the

following eight colors: None (black), Blue1,

Blue2, Green1, Green2, Magenta, Red1, or

Red2.

■ Screen Saver

You can set the time at which the screen saver is

activated to any one of the following four

options: 1 minute, 5 minutes, 10 minutes, or Off

(screen saver off).

When the screen saver activates, the onscreen

display on your TV disappears. Press any button

on the remote controller to cancel the screen

saver and resume the onscreen display.

While the OSD mode is set to On, you can set

the RI Dock’s video output to PAL or NTSC.

If the onscreen display looks distorted on your

TV, try changing the TV system.

•While pressing and holding down the

[SETUP] button, press the VOLUME Up [ ]

button for more than 3 seconds to select

NTSC, or press the VOLUME Down [ ] but-

ton for more than 3 seconds to select PAL.

■ Functions

Depending on your amp and generation of

iPod, you may also be able to use the following

functions.

•System On Function

*1

When you turn on your amp, the iPod turns on

as well. With some amps, you may need to

press the [ON] button on your amp’s remote

controller’s twice to turn on the other compo-

nents in your system.

•System Off Function

When you turn off your amp, the iPod turns off

as well.

•Auto Power On Function

*2

If you start iPod playback while your amp is on

Standby, your amp will automatically turn on

and select your iPod as the input source. Then,

your iPod will start playback.

•Direct Change Function

*2

If you start iPod playback while listening to

another input source, your amp will automati-

cally select your iPod as the input source.

•Timer Play

*1

You can use your amp’s Timer function to turn

on your amp and iPod and start playback at a

speciﬁed time.

•Using Your Amp’s Remote Controller

You can use your amp’s remote controller to

control basic iPod functions (see page 13).

TV Display Settings

Setting the TV System

Other Functions

*1. This feature is not supported by 3rd generation iPods.

*2. If you use your iPod’s controls to start an iPod slideshow or

video, these functions will not work, so use the remote con-

troller instead.

Note:

•Your amp may take several seconds to

startup, so you might not hear the ﬁrst

few seconds of the ﬁrst song.

Body_En Page 11 Friday, July 7, 2006 1:06 PM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments