Onkyo DR-815 User Manual download pdf (Page 25)

Connecting the Power Cord

When the power cord is connected to the AC outlet, the

DVD receiver enters Standby mode. The STANDBY

indicator lights up.

When you want to set the clock using the DVD receiver’s

ACCUCLOCK function, the FM antenna needs to be

connected for receiving the RDS radio broadcasts. For

more information, see page 16.

The very ﬁrst time you turn on the DVD receiver, the ACCUCLOCK function automatically sets the clock by using the

CT (Clock Time) information present in RDS radio broadcasts. While the clock is being set, “Wait” ﬂashes on the

display, as shown. It may take up to ﬁve minutes to set the clock.

When the clock has been set, the message “Clock Adjusted” scrolls across the display, then the day and time are dis-

played for a while, as shown.

The ACCUCLOCK function automatically updates the clock daily at 2 A.M., 3 A.M. and 2 P.M.

If the clock has not been set correctly, see “Setting ACCUCLOCK to Use a Speciﬁc Station” on page 58 and “Setting

the Clock Manually” on page 59.

If you don’t want ACCUCLOCK to automatically update the clock at 2 A.M., 3 A.M. and 2 P.M. everyday, you can turn

it off as follows.

Note:

This operation is not available if time adjustment was not

properly performed in the previous section.

To wall outlet

STANDBY

indicator

First Time Setup

Turning Off ACCUCLOCK

Press TIMER button repeatedly

until “Clock” appears on the dis-

play, as shown.

Press MULTI JOG.

“*AccuClock*” appears on the display,

as shown.

These asterisks appear when the

ACCUCLOCK function is on.

To turn off ACCUCLOCK, press

YES/MODE.

The asterisks disappear, indicating that

the ACCUCLOCK function is off. To

turn the ACCUCLOCK function on

again, press YES/MODE so that aster-

isks appear.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 83 84

No comments

Onkyo DR-815 User Manual Page 25