Onkyo HT-S780 User Manual download pdf (Page 47)

Advanced Setup

—Continued

Speaker Levels

With this function, you can adjust the volume of each

speaker so that all speakers can be heard equally at the

listening position.

Note:

•A quicker way to adjust the speaker levels is to press

the remote controller’s [TEST TONE] button to output

the test tone, use the [LEVEL–] and [LEVEL+] but-

tons to adjust the levels, and use the [CH SEL] button

to select the speakers.

• If the multichannel input is selected (page 35), in step

2, the “3. MultiLevel” menu appears instead of the

“3. Level Cal” menu, and you can adjust the level of

each channel of the multichannel input regardless of

the Speaker Conﬁguration settings.

Press the [RECEIVER] button fol-

lowed by the [SETUP] button on

the remote controller.

Use the Up and Down [ ]/[ ]

buttons to select “3. Level Cal,”

and then press the [ENTER] but-

ton.

A pink noise test tone is output by the

front left speaker.

Turn up the volume so that you

can hear the test tone sufﬁ-

ciently.

While each speaker outputs the test

tone, its name appears on the display, as

shown.

Use the Left and Right [ ]/[ ]

buttons to adjust the speaker

level, and use the Down [ ] but-

ton to select the next speaker.

The level can be adjusted from –12 to

+12 dB in 1 dB steps (–15 to +12 dB

for the subwoofer).

Repeat step 4 so that the level of

the test tone from each speaker

is the same.

Speakers that you set to No or None in

the Speaker Conﬁguration (page 48) do

not output the test tone.

Speaker levels cannot be adjusted while the

AV receiver is muted.

Press the [SETUP] button.

Setup closes.

Don’t forget to turn down the volume if

you turned it up while setting the levels.

HT-S780_En.book Page 47 Monday, February 28, 2005 2:13 PM

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 70 71

Comments to this Manuals

No comments

Onkyo HT-S780 User Manual Page 47

Comments to this Manuals

Related products and manuals for Acoustics Onkyo HT-S780